Ara
Toplam kayıt 42, listelenen: 11-20
EFFECT OF TENON GEOMETRY, GRAIN ORIENTATION, AND SHOULDER ON BENDING MOMENT CAPACITY AND MOMENT ROTATION CHARACTERISTICS OF MORTISE AND TENON JOINTS
(Soc Wood Sci Technol, 2012)
Bending moment capacity and moment rotation characteristics of mortise and tenon joints as a function of tenon geometry, grain orientation, length, and shoulder fit were examined. Bending moment capacity of all joints in ...
TECHNICAL NOTE: STATIC VERSUS CYCLIC LOAD CAPACITY OF SIDE CHAIRS CONSTRUCTED WITH MORTISE AND TENON JOINTS
(Soc Wood Sci Technol, 2013)
The effect of cross-sectional tenon geometry on static and cyclic load capacity of side chairs constructed with round-, rectangular-, and diamond-shaped mortise and tenon joints was investigated. Cyclic load capacity ...
EFFECT OF MATERIAL PROPERTIES AND ANCHORAGE LOCATION ON LOAD-BEARING CAPACITY OF SCREW-CONNECTED AND HUNG CABINETS
(Soc Wood Sci Technol, 2014)
Effects of material type and thickness of selected wood-based composites for construction of cabinets and anchorage location of screws attaching cabinets to the wall on the vertical load-bearing capacity of four-sided wall ...
Shear Force Capacity of Various Doweled Frame Type Furniture Joints
(Kastamonu Univ, Orman Fak, 2013)
Tests were carried out to determine the ultimate shear force capacity of numerous of doweled frame type furniture joints under controlled laboratory conditions. Sugar maple (Acer saccharum), soft maple (Acer negund), yellow ...
Effect of laboratory-accelerated aging treatment on the ultimate strength of a 4-sided MDF kitchen cabinet
(Tubitak Scientific & Technical Research Council Turkey, 2013)
In this study, 4-sided rectangular full-size cabinets from 2 types of medium-density fiberboard (MDF; melamine-coated MDF with edge band and uncoated MDF without edge band) were manufactured and tested. Screws with nominal ...
Effect of the Panel Type and Panel Thickness on Moment Resistance of Screw-Jointed Corner Joints and Stiffness of Four-Member Cabinets
(North Carolina State Univ Dept Wood & Paper Sci, 2014)
The objective of this study was to investigate the effects of panel type and panel thickness on moment resistance of L-type corner joints and deflection characteristics of four-member cabinets. Three different wood based ...
Effects of screw sizes on load bearing capacity and stiffness of five-sided furniture cases constructed of particleboard and medium density fiberboard
(Forest Products Soc, 2008)
This study was carried out to determine the effects of the screw sizes and board material type oil the load bearing capacity and stiffness of five-sided furniture cases. Nine sizes of screws that included 3.5 by 40, 3.5 ...
Montaja hazır koltuk iskeletlerinin mukavemetinin sonlu elemanlar analizi ile belirlenmesi
(2007)
Bu çalışmada, ağaç ve ağaç esaslı (kompozit) malzemelerden tutkalsız-vidalı (demonte) olarak üretilmiş koltuk iskeletlerinin mukavemet özellikleri araştırılmıştır. Ayrıca, koltuk yan düzlem çerçevesinde, ara kayıtın yeri ...
Ahşap malzemede zarar yapan Hylotrupes bajulus (L.) ve Trichoferus griseus (F.) (Coleoptera: Cerambycidae) türlerinin ahşabın bazı fiziksel ve mekanik özelliklerine etkileri üzerinde araştırmalar
(2006)
Bu çalışma 2003–2005 yılları arasında doğa ve laboratuvar koşullarında gerçekleştirilmiştir. Ekonomik anlamda ahşap konstrüksiyonlarda en çok kullanılan, böcekler tarafından zarara uğratılmış ve böcek zararına uğramamış ...
Shear force and bending moment capacities of joints constructed with glued corner blocks
(Forest Products Soc, 2006)
Tests were carried out to determine the ultimate shear and bending moment capacities of glued corner blocks under controlled laboratory conditions. Yellow-poplar and sweetgum were utilized in constructing the joint specimens, ...