Ara
Toplam kayıt 42, listelenen: 1-10
Effect of Tenon Size on Static Front to Back Loading Performance of Wooden Chairs in Comparison with Acceptable Design Loads
(North Carolina State Univ Dept Wood & Paper Sci, 2018)
The effects of tenon size were investigated relative to the front to back loading performance of Scots pine (Pinus sylvestris L.) chairs. Forty-five chair frames were constructed with mortise and tenon joints with 9 tenon ...
LOWER TOLERANCE LIMIT APPROACH TO EQUATION-BASED RATIONAL DESIGN VALUES FOR L-SHAPED MORTISE AND TENON JOINTS
(Soc Wood Sci Technol, 2017)
Statistical lower tolerance limits (LTLs) were computed for the ratios obtained by dividing the test values for 360 L-shaped rectangular mortise and tenon joints consisting of 72 different configurations of five specimens ...
TECHNICAL NOTE: LOWER TOLERANCE LIMIT APPROACH TO EQUATION-BASED RATIONAL DESIGN VALUES FOR T-SHAPED MORTISE AND TENON JOINTS
(Soc Wood Sci Technol, 2017)
A nonlinear regression expression was fitted to the test data obtained from a study of the bending moment capacity of 320 rectangular T-shaped mortise and tenon furniture joints consisting of 64 configurations of five ...
Effects of cross-sectional shape on the bending strength in furniture joints
(Kastamonu Univ, Orman Fak, 2018)
Aim of the study: Tests were carried out to evaluate the ultimate bending strength of the circular and square cross sectioned furniture joint members and find out whether the form factor is applicable to the small specimens ...
Determination of the Strength of The Ready to Assemble Sofa Frames With Finite Element Analysis
(Gazi Univ, 2007)
In this study, the strength properties of screwed-without glue (demonte) jointed sofa frames constructed of solid wood and wood based (composite) materials were investigated. Furthermore, place of the stretcher was optimized ...
Bending moment capacity of rectangular mortise and tenon furniture joints
(Forest Products Soc, 2005)
This study investigated the effects of wood species, adhesive type, rail width, tenon depth, and tenon length oil bending strength and flexibility of mortise and tenon T-type end to side grain joints. Sugar maple, red oak, ...
Effect of shoulders on bending moment capacity of round mortise and tenon joints
(Forest Products Soc, 2006)
Tests were conducted to determine the effect of close-fitting shoulders on the bending moment capacity of round mortise and tenon joints. Results indicate that close-fitting shoulders can substantially increase the strength ...
Effects of Wood Species, Number of Teeth, and Adhesive Type on Moment Capacities of Box-Joints
(North Carolina State Univ Dept Wood & Paper Sci, 2020)
Effects of the wood species, number of teeth, and adhesive type were studied relative to the moment capacities of box joints under tension and compression loadings, which is commonly used in case type solid wood furniture. ...
RELATIONSHIP BETWEEN STATIC AND CYCLIC FRONT TO BACK LOAD CAPACITY OF WOODEN CHAIRS, AND EVALUATION OF THE STRENGTH VALUES ACCORDING TO ACCEPTABLE DESIGN VALUES
(Soc Wood Sci Technol, 2018)
Tests were carried out to investigate the relationship between static and cyclic strength of wooden chairs. Furthermore, cyclic front to back load performance of chairs were compared with acceptable design loads that were ...
Screw Withdrawal Resistance and Surface Roughness of Woven Carbon and Glass Fiber-reinforced Wood-plastic Composites
(North Carolina State Univ Dept Wood & Paper Sci, 2020)
Wood-plastic composites (WPCs) have become one of the most remarkable materials for construction in recent years. Along with high resistance against biological threats, the high mechanical properties are also desired from ...