Ara
Toplam kayıt 11, listelenen: 1-10
Determination of the Strength of The Ready to Assemble Sofa Frames With Finite Element Analysis
(Gazi Univ, 2007)
In this study, the strength properties of screwed-without glue (demonte) jointed sofa frames constructed of solid wood and wood based (composite) materials were investigated. Furthermore, place of the stretcher was optimized ...
Determination of Some Physical and Mechanical Properties of Various Wood and Wood Composite Materials
(Gazi Univ, 2007)
In this study, some technical properties needed in engineering design of furniture of some solid wood and wood composite materials were determined according to related standards. Turkish beech (Fagus Orientalis Lipsky) and ...
Comparison of the Moment Capacity of Case Furniture Corner Joints Connected with Solid Wood and Plastic Dowels
(Gazi Univ, 2012)
In this study, moment capacity of L-type corner joints connected with dowels were compared. Specimens were constructed of 16 and 18 mm particleboard (YL) and medium density fiberboard (MDF). In constructing the joints, ...
Effects of Different Joint Techniques on Withdrawal Strength of T-Type Furniture Joints
(Kastamonu Univ, Orman Fak, 2012)
In this study, withdrawal strengths of T-type furniture joints prepared from different wood species and connected with different joint methods were compared. Specimens were constructed of Turkish beech (Fagus orientalis ...
The Effects of Wood Species and Joint Technique on Bending Moment Capacity and Elasticity of T-type Furniture Joints
(Gazi Univ, 2012)
In this study, bending moment capacities and elasticity of T-type furniture joints prepared from different wood species and connected with different techniques were compared. Specimens were constructed of Turkish beech ...
Determination of Pulling Force Performances of T-Type Joint Elements Prepared with Some Laminated Veneer Lumber
(Kastamonu Univ, Orman Fak, 2011)
In this study, tension force performance of T-type furniture joints with laminated veneer lumber prepared from domestic and tropical wood were compared. In the experiments, three different types of laminated veneer lumber ...
Shear Force Capacity of H-Type Case Furniture Joints Connected with Solid Wood and Plastic Dowels
(Kastamonu Univ, Orman Fak, 2012)
In this study, shear force capacity of H-type case furniture corner joints connected with dowels were investigated. Specimens were constructed of 16 and 18 mm particleboard (YL) and medium density fiberboard (MDF). In ...
Comparison of The Withdrawal Strength of Different Joint Techniques for Wooden End To End Joints
(Kastamonu Univ, Orman Fak, 2012)
In this study, withdrawal strengths of end to end joints prepared from different wood species and connected with different techniques were compared. Specimens were constructed of Turkish beech (Fagus orientalis L.), Scotch ...
Effect of Joint Technique on Moment Capacity of L-Type Furniture Corner Joints for Case Furniture Constructed
(Kastamonu Univ, Orman Fak, 2014)
In this study, effects of joint technique and material type on moment capacity of case furniture "L" type comer joints under diagonal tensile and compression loads was aimed to determine. The specimens were prepared from ...
Determination of the Bending Strength and Modulus of Elasticity of Solid Wood and Laminated Veneer Lumber
(Gazi Univ, 2010)
In this study, bending strength (MOR) and modulus of elasticity (MOE) of the laminated veneer lumber (LVL) and solid wood materials which are constructed of different wood species were determined. Solid wood and LVL ...