Ara
Toplam kayıt 30, listelenen: 21-30
THE EFFECTS OF SOME IMPREGNATION PARAMETERS ON MODULUS OF RUPTURE AND MODULUS OF ELASTICITY OF WOOD
(Slovak Forest Products Research Inst, 2011)
The aim of this study was to determine the effects of some impregnation parameters such as impregnation chemicals, impregnation durations, and impregnation methods on modulus of rupture (MOR) and modulus of elasticity (MOE) ...
EFFECTS OF SILICA GEL ON LEACHING RESISTANCE AND THERMAL PROPERTIES OF IMPREGNATED WOOD
(Slovak Forest Products Research Inst, 2010)
The aim of this study was to increase the resistance of fire retardant chemicals for leaching in order to improve the fire resistance of wood. For this purpose, Scots pine (Pinus sylvestris L.) and Chestnut (Castanea sativa ...
Effects of heat treatment and surface roughness on bonding strength
(Elsevier Sci Ltd, 2012)
The objective of this study was to determine the effect of heat treatment on bonding strength of the samples from four different species, namely Scotch pine, oriental beech, white oak and Uludag fir woods. The samples were ...
GLOSSINESS, COLOR STABILITY, AND SURFACE ROUGHNESS OF WOOD TREATED WITH SOME BLEACHING CHEMICALS
(State Forest Products Research Inst, 2009)
The aim of this study was to determine the effects of different bleaching chemicals and their treatment time on glossiness, color stability, and surface roughness of wood. Spruce (Picea orientalis L.) and oak (Quercus ...
COLOUR AND GLOSS CHANGES OF SOCTS PINE AFTER HEAT MODIFICATION
(State Forest Products Research Inst, 2011)
Heat treatment of Scots pine (Pinus sylvestris L.) wood was carried out by hot air in an oven for 2, 4, and 8 h at 150, 175, and 200 degrees C. After heat treatment, colour and gloss changes of wood Specimens were measured. ...
Effects of Adding Unsaturated Polyester to the PVAC Adhesive on the Dimensional Stability of Laminated Veneer Lumber
(Brill Academic Publishers, 2011)
Many properties of wood are affected by changes in moisture content below the fiber saturation point of wood. In this study, the dimensional stability of laminated veneer lumber (LVL), according to TSI EN 4084 and EN 4086, ...
SOME PROPERTIES OF TURKISH SWEETGUM BALSAM (STYRAX LIQUIDUS) IMPREGNATED ORIENTAL BEECH WOOD PART II: DECAY RESISTANCE, MECHANICAL, AND THERMAL PROPERTIES
(Slovak Forest Products Research Inst, 2015)
This study was designed to investigate decay resistance, some mechanical properties such as modulus of rupture (MOR), modulus of eleasticity (MOE), compressison strength parallel to grain (CSPG) and thermal characteristics ...
THE EFFECT OF BORON COMPOUNDS IMPREGNATION ON PHYSICAL AND MECHANICAL PROPERTIES OF WOOD POLYMER COMPOSITES
(Slovak Forest Products Research Inst, 2015)
Wood polymer composites were prepared by styrene (ST) and different boron compounds impregnated sapwood of Oriental beech (Fagus orientalis L.) Boric acid (BA), borax (BX) and their mixture (1:1; w/w) aqueous solutions at ...
Determination leaching of boron from Oriental beech wood coated with polyurethane/polyurea (PUU) hybrid and epoxy (EPR) resins
(Associacao Brasileira de Polimeros, 2022)
In this study, the leaching performance of boron compounds from Oriental beech (Fagus orientalis L.) wood coated with polyurethane/polyurea (PUU) hybrid resin and epoxy resin (EPR) was investigated. Leaching of boron test ...
Some additional fields in this record are shown in regional languages from the following databases
(ASSOC BRASIL POLIMEROS, 2022)
In this study, the leaching performance of boron compounds from Oriental beech (Fagus orientalis L.) wood coated with polyurethane/polyurea (PUU) hybrid resin and epoxy resin (EPR) was investigated. Leaching of boron test ...