Ara
Toplam kayıt 33, listelenen: 11-20
Shear Force Capacity of Various Doweled Frame Type Furniture Joints
(Kastamonu Univ, Orman Fak, 2013)
Tests were carried out to determine the ultimate shear force capacity of numerous of doweled frame type furniture joints under controlled laboratory conditions. Sugar maple (Acer saccharum), soft maple (Acer negund), yellow ...
Effect of the Panel Type and Panel Thickness on Moment Resistance of Screw-Jointed Corner Joints and Stiffness of Four-Member Cabinets
(North Carolina State Univ Dept Wood & Paper Sci, 2014)
The objective of this study was to investigate the effects of panel type and panel thickness on moment resistance of L-type corner joints and deflection characteristics of four-member cabinets. Three different wood based ...
Effects of screw sizes on load bearing capacity and stiffness of five-sided furniture cases constructed of particleboard and medium density fiberboard
(Forest Products Soc, 2008)
This study was carried out to determine the effects of the screw sizes and board material type oil the load bearing capacity and stiffness of five-sided furniture cases. Nine sizes of screws that included 3.5 by 40, 3.5 ...
Experimental and numerical analysis of mounting force of auxetic dowels for furniture joints
(Elsevier Ltd, 2021)
Limited number of papers describe the practical use of auxetics in the wood and furniture sector. Only one paper describes the auxetic nails. None of them analyzed the impact of using auxetics on the strength of furniture ...
Shear force and bending moment capacities of joints constructed with glued corner blocks
(Forest Products Soc, 2006)
Tests were carried out to determine the ultimate shear and bending moment capacities of glued corner blocks under controlled laboratory conditions. Yellow-poplar and sweetgum were utilized in constructing the joint specimens, ...
Bending Moment Capacities of L-Shaped Mortise and Tenon Joints under Compression and Tension Loadings
(North Carolina State Univ Dept Wood & Paper Sci, 2015)
Tests were carried out to determine the bending moment capacities of L-shaped mortise and tenon furniture joints under both compression and tension loadings. The effects of wood species (Turkish beech and Scotch pine), ...
Effect of the number of screws and screw size on moment capacity of furniture corner joints in case construction
(Forest Products Soc, 2008)
Tests were carried out in order to determine the bending moment capacity of L-type glued-screwed coner joints constructed with multiple screws. 6 sizes of screws were used for assembling the specimens. 2, 3, and 4 screws ...
Static Front to Back Loading Capacity of Wood Chairs and Relationship between Chair Strength and Individual Joint Strength
(North Carolina State Univ Dept Wood & Paper Sci, 2016)
The relationship between the static front to back loading capacity of chairs and the moment capacities of the joints used in their side frames was investigated. The secondary purpose of the study was to determine the effect ...
STRUCTURAL ANALYSES OF WOODEN CHAIRS BY FINITE ELEMENT METHOD (FEM) AND ASSESSMENT OF THE CYCLIC LOADING PERFORMANCE TN COMPARISON WITH ALLOWABLE DESIGN LOADS
(Universidad del Bio-Bio, 2021)
Tests were carried out to investigate the cyclic loading performance of chairs constructed of Scotch pine (Pinus sylvestris) and Oriental beech (Fagus orientalis). Totally, 30 real size chairs were constructed and assembled ...
Ultimate Failure Load and Stiffness of Screw Jointed Furniture Cabinets Constructed of Particleboard and Medium-Density Fiberboard
(Forest Products Soc, 2011)
The objective of this study was to investigate the effects of material type, screw diameter, and screw length on ultimate failure load and stiffness of four-sided furniture cabinets. In total, 81 four-sided test cabinets ...