Ara
Toplam kayıt 28, listelenen: 1-10
LOWER TOLERANCE LIMIT APPROACH TO EQUATION-BASED RATIONAL DESIGN VALUES FOR L-SHAPED MORTISE AND TENON JOINTS
(Soc Wood Sci Technol, 2017)
Statistical lower tolerance limits (LTLs) were computed for the ratios obtained by dividing the test values for 360 L-shaped rectangular mortise and tenon joints consisting of 72 different configurations of five specimens ...
Determination of the Strength of The Ready to Assemble Sofa Frames With Finite Element Analysis
(Gazi Univ, 2007)
In this study, the strength properties of screwed-without glue (demonte) jointed sofa frames constructed of solid wood and wood based (composite) materials were investigated. Furthermore, place of the stretcher was optimized ...
Determination of Some Physical and Mechanical Properties of Various Wood and Wood Composite Materials
(Gazi Univ, 2007)
In this study, some technical properties needed in engineering design of furniture of some solid wood and wood composite materials were determined according to related standards. Turkish beech (Fagus Orientalis Lipsky) and ...
BENDING MOMENT AND SHEAR FORCE CAPACITIES OF THE T-TYPE DOWELED FURNITURE JOINTS REINFORCED WITH DIFFERENT SIZES OF CORNER BLOCKS
(Gazi Univ, Fac Engineering Architecture, 2008)
In this study, effects of the corner block dimensions on moment and shear force capacities for T-type glued doweled furniture joints were investigated. Specimens were prepared of Turkish beech (Fagus orientalis Lipsky) and ...
Comparison of Some Physical and Mechanical Properties of Polyvinil Cloride (Pvc) Panels As An Alternative toConventional Case Furniture Materials
(Kastamonu Univ, Orman Fak, 2013)
In this study, physical and mechanical properties of polyvinyl chloride (PVC) panels that is commonly produced and used and expected to be an alternative material for panel (case) furniture manufacturing was determined and ...
Comparison of the Moment Capacity of Case Furniture Corner Joints Connected with Solid Wood and Plastic Dowels
(Gazi Univ, 2012)
In this study, moment capacity of L-type corner joints connected with dowels were compared. Specimens were constructed of 16 and 18 mm particleboard (YL) and medium density fiberboard (MDF). In constructing the joints, ...
Bending Moment Capacities of Case Furniture Corner Joints Fabricated From Polyvnil Cloride (Pvc) Panels as an Alternative Materials
(Kastamonu Univ, Orman Fak, 2013)
In this study, bending moment capacities of L- type corner joints farbricated from polyvinyl chloride (PVC) panels that are commonly produced and used and expected to be an alternative material for case (panel) furniture ...
Effects of Different Joint Techniques on Withdrawal Strength of T-Type Furniture Joints
(Kastamonu Univ, Orman Fak, 2012)
In this study, withdrawal strengths of T-type furniture joints prepared from different wood species and connected with different joint methods were compared. Specimens were constructed of Turkish beech (Fagus orientalis ...
BENDING MOMENT CAPACITY OF L-TYPE FURNITURE CORNER JOINTS CONSTRUCTED OF PARTICLEBOARD PRODUCED FROM VINE PRUNING RESIDUES
(Slovak Forest Products Research Inst, 2014)
Tests were carried out to investigate the utilization of vineyard pruning residues in panel products as a structural material for manufacturing of the furniture cases. For this purpose, bending moment capacities of L-type ...
The Effects of Wood Species and Joint Technique on Bending Moment Capacity and Elasticity of T-type Furniture Joints
(Gazi Univ, 2012)
In this study, bending moment capacities and elasticity of T-type furniture joints prepared from different wood species and connected with different techniques were compared. Specimens were constructed of Turkish beech ...