Ara
Toplam kayıt 8, listelenen: 1-8
Effects of Wood Species, Number of Teeth, and Adhesive Type on Moment Capacities of Box-Joints
(North Carolina State Univ Dept Wood & Paper Sci, 2020)
Effects of the wood species, number of teeth, and adhesive type were studied relative to the moment capacities of box joints under tension and compression loadings, which is commonly used in case type solid wood furniture. ...
Comparison of Some Physical and Mechanical Properties of Polyvinil Cloride (Pvc) Panels As An Alternative toConventional Case Furniture Materials
(Kastamonu Univ, Orman Fak, 2013)
In this study, physical and mechanical properties of polyvinyl chloride (PVC) panels that is commonly produced and used and expected to be an alternative material for panel (case) furniture manufacturing was determined and ...
BENDING MOMENT CAPACITY OF L-TYPE FURNITURE CORNER JOINTS CONSTRUCTED OF PARTICLEBOARD PRODUCED FROM VINE PRUNING RESIDUES
(Slovak Forest Products Research Inst, 2014)
Tests were carried out to investigate the utilization of vineyard pruning residues in panel products as a structural material for manufacturing of the furniture cases. For this purpose, bending moment capacities of L-type ...
Determination of Pulling Force Performances of T-Type Joint Elements Prepared with Some Laminated Veneer Lumber
(Kastamonu Univ, Orman Fak, 2011)
In this study, tension force performance of T-type furniture joints with laminated veneer lumber prepared from domestic and tropical wood were compared. In the experiments, three different types of laminated veneer lumber ...
EFFECT OF MATERIAL PROPERTIES AND ANCHORAGE LOCATION ON LOAD-BEARING CAPACITY OF SCREW-CONNECTED AND HUNG CABINETS
(Soc Wood Sci Technol, 2014)
Effects of material type and thickness of selected wood-based composites for construction of cabinets and anchorage location of screws attaching cabinets to the wall on the vertical load-bearing capacity of four-sided wall ...
Shear Force Capacity of Various Doweled Frame Type Furniture Joints
(Kastamonu Univ, Orman Fak, 2013)
Tests were carried out to determine the ultimate shear force capacity of numerous of doweled frame type furniture joints under controlled laboratory conditions. Sugar maple (Acer saccharum), soft maple (Acer negund), yellow ...
Effect of Joint Technique on Moment Capacity of L-Type Furniture Corner Joints for Case Furniture Constructed
(Kastamonu Univ, Orman Fak, 2014)
In this study, effects of joint technique and material type on moment capacity of case furniture "L" type comer joints under diagonal tensile and compression loads was aimed to determine. The specimens were prepared from ...
Effect of the Panel Type and Panel Thickness on Moment Resistance of Screw-Jointed Corner Joints and Stiffness of Four-Member Cabinets
(North Carolina State Univ Dept Wood & Paper Sci, 2014)
The objective of this study was to investigate the effects of panel type and panel thickness on moment resistance of L-type corner joints and deflection characteristics of four-member cabinets. Three different wood based ...