Ara
Toplam kayıt 36, listelenen: 21-30
Bazı masif ve kompozit ağaç malzemelerin kavela tutma performanslarının belirlenmesi
(2007)
Bu çalışmada; bazı masif ve kompozit ağaç malzemelerin, kenardan ve yüzeyden kavela tutma performanslarının belirlenmesi amaçlanmıştır. Deneylerde ağaç malzemelerden Doğu kayını (Fagus orientalis Lipsky) ve sarıçam (Pinus ...
Masif ve Lamine ağaç malzemelerin (LAM) Alyan Vida tutma mukavemeti
(2009)
Bu çalışmada, farklı ağaç türlerinden hazırlanan, polivinilasetat (PVAc) ve üre-formaldehit (ÜF) tutkallarıyla yapıştırılmış lamine malzemelerin (LVL), liflere dik ve paralel doğrultudaki alyan vida tutma performansları, ...
Montaja hazır koltuk iskeletlerinin mukavemetinin sonlu elemanlar analizi ile belirlenmesi
(2007)
Bu çalışmada, ağaç ve ağaç esaslı (kompozit) malzemelerden tutkalsız-vidalı (demonte) olarak üretilmiş koltuk iskeletlerinin mukavemet özellikleri araştırılmıştır. Ayrıca, koltuk yan düzlem çerçevesinde, ara kayıtın yeri ...
Çeşitli masif ve kompozit ağaç malzemelerinin bazı fiziksel ve mekanik özelliklerinin belirlenmesi
(2007)
Bu çalışmada, çeşitli masif ve kompozit ağaç malzemelerin mobilya mühendislik tasarımında gerekli olan bazı fiziksel ve mekanik özellikleri, ilgili standartlara göre belirlenmiştir. Deneylerde, masif ağaç malzeme olarak ...
Farklı ölçülerde köşe destek elemanı kullanılmış T-tipi kavelalı mobilya birleştirmelerinin moment ve kesme kuvveti taşıma kapasiteleri
(2008)
Bu çalışmada, T-tipi kavelalı tutkallı mobilya birleştirmelerinde, köşe destek elemanı boyutunun moment ve kesme kuvveti taşıma performansı üzerindeki etkileri incelenmiştir. Deney örnekleri, Doğu kayını (Fagus orientalis ...
Experimental and numerical analysis of mounting force of auxetic dowels for furniture joints
(Elsevier Ltd, 2021)
Limited number of papers describe the practical use of auxetics in the wood and furniture sector. Only one paper describes the auxetic nails. None of them analyzed the impact of using auxetics on the strength of furniture ...
Bending Moment Capacities of L-Shaped Mortise and Tenon Joints under Compression and Tension Loadings
(North Carolina State Univ Dept Wood & Paper Sci, 2015)
Tests were carried out to determine the bending moment capacities of L-shaped mortise and tenon furniture joints under both compression and tension loadings. The effects of wood species (Turkish beech and Scotch pine), ...
Static Front to Back Loading Capacity of Wood Chairs and Relationship between Chair Strength and Individual Joint Strength
(North Carolina State Univ Dept Wood & Paper Sci, 2016)
The relationship between the static front to back loading capacity of chairs and the moment capacities of the joints used in their side frames was investigated. The secondary purpose of the study was to determine the effect ...
STRUCTURAL ANALYSES OF WOODEN CHAIRS BY FINITE ELEMENT METHOD (FEM) AND ASSESSMENT OF THE CYCLIC LOADING PERFORMANCE TN COMPARISON WITH ALLOWABLE DESIGN LOADS
(Universidad del Bio-Bio, 2021)
Tests were carried out to investigate the cyclic loading performance of chairs constructed of Scotch pine (Pinus sylvestris) and Oriental beech (Fagus orientalis). Totally, 30 real size chairs were constructed and assembled ...
Ultimate Failure Load and Stiffness of Screw Jointed Furniture Cabinets Constructed of Particleboard and Medium-Density Fiberboard
(Forest Products Soc, 2011)
The objective of this study was to investigate the effects of material type, screw diameter, and screw length on ultimate failure load and stiffness of four-sided furniture cabinets. In total, 81 four-sided test cabinets ...