Ara
Toplam kayıt 60, listelenen: 21-30
Bending Strength of Screwed Corner Joints with Different Materials
(Gazi Univ, 2006)
Tests were carried out in order to determine the bending strength with compression and tension force with and without glue in addition to screws on furniture corner joints in a construction case. The specimens were prepared ...
Effects of Wood Species, Number of Teeth, and Adhesive Type on Moment Capacities of Box-Joints
(North Carolina State Univ Dept Wood & Paper Sci, 2020)
Effects of the wood species, number of teeth, and adhesive type were studied relative to the moment capacities of box joints under tension and compression loadings, which is commonly used in case type solid wood furniture. ...
RELATIONSHIP BETWEEN STATIC AND CYCLIC FRONT TO BACK LOAD CAPACITY OF WOODEN CHAIRS, AND EVALUATION OF THE STRENGTH VALUES ACCORDING TO ACCEPTABLE DESIGN VALUES
(Soc Wood Sci Technol, 2018)
Tests were carried out to investigate the relationship between static and cyclic strength of wooden chairs. Furthermore, cyclic front to back load performance of chairs were compared with acceptable design loads that were ...
Comparison of Some Physical and Mechanical Properties of Polyvinil Cloride (Pvc) Panels As An Alternative toConventional Case Furniture Materials
(Kastamonu Univ, Orman Fak, 2013)
In this study, physical and mechanical properties of polyvinyl chloride (PVC) panels that is commonly produced and used and expected to be an alternative material for panel (case) furniture manufacturing was determined and ...
Comparison of the Moment Capacity of Case Furniture Corner Joints Connected with Solid Wood and Plastic Dowels
(Gazi Univ, 2012)
In this study, moment capacity of L-type corner joints connected with dowels were compared. Specimens were constructed of 16 and 18 mm particleboard (YL) and medium density fiberboard (MDF). In constructing the joints, ...
Bending Moment Capacities of Case Furniture Corner Joints Fabricated From Polyvnil Cloride (Pvc) Panels as an Alternative Materials
(Kastamonu Univ, Orman Fak, 2013)
In this study, bending moment capacities of L- type corner joints farbricated from polyvinyl chloride (PVC) panels that are commonly produced and used and expected to be an alternative material for case (panel) furniture ...
Effects of Different Joint Techniques on Withdrawal Strength of T-Type Furniture Joints
(Kastamonu Univ, Orman Fak, 2012)
In this study, withdrawal strengths of T-type furniture joints prepared from different wood species and connected with different joint methods were compared. Specimens were constructed of Turkish beech (Fagus orientalis ...
BENDING MOMENT CAPACITY OF L-TYPE FURNITURE CORNER JOINTS CONSTRUCTED OF PARTICLEBOARD PRODUCED FROM VINE PRUNING RESIDUES
(Slovak Forest Products Research Inst, 2014)
Tests were carried out to investigate the utilization of vineyard pruning residues in panel products as a structural material for manufacturing of the furniture cases. For this purpose, bending moment capacities of L-type ...
The Effects of Wood Species and Joint Technique on Bending Moment Capacity and Elasticity of T-type Furniture Joints
(Gazi Univ, 2012)
In this study, bending moment capacities and elasticity of T-type furniture joints prepared from different wood species and connected with different techniques were compared. Specimens were constructed of Turkish beech ...
Determination of Pulling Force Performances of T-Type Joint Elements Prepared with Some Laminated Veneer Lumber
(Kastamonu Univ, Orman Fak, 2011)
In this study, tension force performance of T-type furniture joints with laminated veneer lumber prepared from domestic and tropical wood were compared. In the experiments, three different types of laminated veneer lumber ...