Ara
Toplam kayıt 24, listelenen: 1-10
Effect of Tenon Size on Static Front to Back Loading Performance of Wooden Chairs in Comparison with Acceptable Design Loads
(North Carolina State Univ Dept Wood & Paper Sci, 2018)
The effects of tenon size were investigated relative to the front to back loading performance of Scots pine (Pinus sylvestris L.) chairs. Forty-five chair frames were constructed with mortise and tenon joints with 9 tenon ...
Effects of Cross-sectional Geometry and Force Direction on Bending Strength and Modulus of Elasticity of Some Softwood Beams
(North Carolina State Univ Dept Wood & Paper Sci, 2019)
The effects of cross-sectional geometry and force direction on bending strength (MOR) and modulus of elasticity (MOE) were investigated in selected softwoods. The specimens were constructed of Scots pine (Pinus sylvestris), ...
LOWER TOLERANCE LIMIT APPROACH TO EQUATION-BASED RATIONAL DESIGN VALUES FOR L-SHAPED MORTISE AND TENON JOINTS
(Soc Wood Sci Technol, 2017)
Statistical lower tolerance limits (LTLs) were computed for the ratios obtained by dividing the test values for 360 L-shaped rectangular mortise and tenon joints consisting of 72 different configurations of five specimens ...
TECHNICAL NOTE: LOWER TOLERANCE LIMIT APPROACH TO EQUATION-BASED RATIONAL DESIGN VALUES FOR T-SHAPED MORTISE AND TENON JOINTS
(Soc Wood Sci Technol, 2017)
A nonlinear regression expression was fitted to the test data obtained from a study of the bending moment capacity of 320 rectangular T-shaped mortise and tenon furniture joints consisting of 64 configurations of five ...
RELATIONSHIP BETWEEN STATIC AND CYCLIC FRONT TO BACK LOAD CAPACITY OF WOODEN CHAIRS, AND EVALUATION OF THE STRENGTH VALUES ACCORDING TO ACCEPTABLE DESIGN VALUES
(Soc Wood Sci Technol, 2018)
Tests were carried out to investigate the relationship between static and cyclic strength of wooden chairs. Furthermore, cyclic front to back load performance of chairs were compared with acceptable design loads that were ...
Comparison of Some Physical and Mechanical Properties of Polyvinil Cloride (Pvc) Panels As An Alternative toConventional Case Furniture Materials
(Kastamonu Univ, Orman Fak, 2013)
In this study, physical and mechanical properties of polyvinyl chloride (PVC) panels that is commonly produced and used and expected to be an alternative material for panel (case) furniture manufacturing was determined and ...
Comparison of the Moment Capacity of Case Furniture Corner Joints Connected with Solid Wood and Plastic Dowels
(Gazi Univ, 2012)
In this study, moment capacity of L-type corner joints connected with dowels were compared. Specimens were constructed of 16 and 18 mm particleboard (YL) and medium density fiberboard (MDF). In constructing the joints, ...
Bending Moment Capacities of Case Furniture Corner Joints Fabricated From Polyvnil Cloride (Pvc) Panels as an Alternative Materials
(Kastamonu Univ, Orman Fak, 2013)
In this study, bending moment capacities of L- type corner joints farbricated from polyvinyl chloride (PVC) panels that are commonly produced and used and expected to be an alternative material for case (panel) furniture ...
Effects of Different Joint Techniques on Withdrawal Strength of T-Type Furniture Joints
(Kastamonu Univ, Orman Fak, 2012)
In this study, withdrawal strengths of T-type furniture joints prepared from different wood species and connected with different joint methods were compared. Specimens were constructed of Turkish beech (Fagus orientalis ...
BENDING MOMENT CAPACITY OF L-TYPE FURNITURE CORNER JOINTS CONSTRUCTED OF PARTICLEBOARD PRODUCED FROM VINE PRUNING RESIDUES
(Slovak Forest Products Research Inst, 2014)
Tests were carried out to investigate the utilization of vineyard pruning residues in panel products as a structural material for manufacturing of the furniture cases. For this purpose, bending moment capacities of L-type ...