Ara
Toplam kayıt 45, listelenen: 1-10
Effect of Tenon Size on Static Front to Back Loading Performance of Wooden Chairs in Comparison with Acceptable Design Loads
(North Carolina State Univ Dept Wood & Paper Sci, 2018)
The effects of tenon size were investigated relative to the front to back loading performance of Scots pine (Pinus sylvestris L.) chairs. Forty-five chair frames were constructed with mortise and tenon joints with 9 tenon ...
Effects of Cross-sectional Geometry and Force Direction on Bending Strength and Modulus of Elasticity of Some Softwood Beams
(North Carolina State Univ Dept Wood & Paper Sci, 2019)
The effects of cross-sectional geometry and force direction on bending strength (MOR) and modulus of elasticity (MOE) were investigated in selected softwoods. The specimens were constructed of Scots pine (Pinus sylvestris), ...
LOWER TOLERANCE LIMIT APPROACH TO EQUATION-BASED RATIONAL DESIGN VALUES FOR L-SHAPED MORTISE AND TENON JOINTS
(Soc Wood Sci Technol, 2017)
Statistical lower tolerance limits (LTLs) were computed for the ratios obtained by dividing the test values for 360 L-shaped rectangular mortise and tenon joints consisting of 72 different configurations of five specimens ...
TECHNICAL NOTE: LOWER TOLERANCE LIMIT APPROACH TO EQUATION-BASED RATIONAL DESIGN VALUES FOR T-SHAPED MORTISE AND TENON JOINTS
(Soc Wood Sci Technol, 2017)
A nonlinear regression expression was fitted to the test data obtained from a study of the bending moment capacity of 320 rectangular T-shaped mortise and tenon furniture joints consisting of 64 configurations of five ...
Determination of the Strength of The Ready to Assemble Sofa Frames With Finite Element Analysis
(Gazi Univ, 2007)
In this study, the strength properties of screwed-without glue (demonte) jointed sofa frames constructed of solid wood and wood based (composite) materials were investigated. Furthermore, place of the stretcher was optimized ...
Determination of Some Physical and Mechanical Properties of Various Wood and Wood Composite Materials
(Gazi Univ, 2007)
In this study, some technical properties needed in engineering design of furniture of some solid wood and wood composite materials were determined according to related standards. Turkish beech (Fagus Orientalis Lipsky) and ...
BENDING MOMENT AND SHEAR FORCE CAPACITIES OF THE T-TYPE DOWELED FURNITURE JOINTS REINFORCED WITH DIFFERENT SIZES OF CORNER BLOCKS
(Gazi Univ, Fac Engineering Architecture, 2008)
In this study, effects of the corner block dimensions on moment and shear force capacities for T-type glued doweled furniture joints were investigated. Specimens were prepared of Turkish beech (Fagus orientalis Lipsky) and ...
Determination of the Strength of Various Sofa Frames with Finite Element Analysis
(Gazi Univ, 2006)
In this study, the strength properties of glued-dowel joined sofa frames constructed of solid wood and wood based composite materials were investigated. Furthermore, the place of the stretcher was optimized in the side ...
Bending Strength of Screwed Corner Joints with Different Materials
(Gazi Univ, 2006)
Tests were carried out in order to determine the bending strength with compression and tension force with and without glue in addition to screws on furniture corner joints in a construction case. The specimens were prepared ...
Effects of Wood Species, Number of Teeth, and Adhesive Type on Moment Capacities of Box-Joints
(North Carolina State Univ Dept Wood & Paper Sci, 2020)
Effects of the wood species, number of teeth, and adhesive type were studied relative to the moment capacities of box joints under tension and compression loadings, which is commonly used in case type solid wood furniture. ...