Ara
Toplam kayıt 30, listelenen: 21-30
Effects of heat treatment and surface roughness on bonding strength
(Elsevier Sci Ltd, 2012)
The objective of this study was to determine the effect of heat treatment on bonding strength of the samples from four different species, namely Scotch pine, oriental beech, white oak and Uludag fir woods. The samples were ...
GLOSSINESS, COLOR STABILITY, AND SURFACE ROUGHNESS OF WOOD TREATED WITH SOME BLEACHING CHEMICALS
(State Forest Products Research Inst, 2009)
The aim of this study was to determine the effects of different bleaching chemicals and their treatment time on glossiness, color stability, and surface roughness of wood. Spruce (Picea orientalis L.) and oak (Quercus ...
COLOUR AND GLOSS CHANGES OF SOCTS PINE AFTER HEAT MODIFICATION
(State Forest Products Research Inst, 2011)
Heat treatment of Scots pine (Pinus sylvestris L.) wood was carried out by hot air in an oven for 2, 4, and 8 h at 150, 175, and 200 degrees C. After heat treatment, colour and gloss changes of wood Specimens were measured. ...
Effects of Adding Unsaturated Polyester to the PVAC Adhesive on the Dimensional Stability of Laminated Veneer Lumber
(Brill Academic Publishers, 2011)
Many properties of wood are affected by changes in moisture content below the fiber saturation point of wood. In this study, the dimensional stability of laminated veneer lumber (LVL), according to TSI EN 4084 and EN 4086, ...
SOME PROPERTIES OF TURKISH SWEETGUM BALSAM (STYRAX LIQUIDUS) IMPREGNATED ORIENTAL BEECH WOOD PART II: DECAY RESISTANCE, MECHANICAL, AND THERMAL PROPERTIES
(Slovak Forest Products Research Inst, 2015)
This study was designed to investigate decay resistance, some mechanical properties such as modulus of rupture (MOR), modulus of eleasticity (MOE), compressison strength parallel to grain (CSPG) and thermal characteristics ...
THE EFFECT OF BORON COMPOUNDS IMPREGNATION ON PHYSICAL AND MECHANICAL PROPERTIES OF WOOD POLYMER COMPOSITES
(Slovak Forest Products Research Inst, 2015)
Wood polymer composites were prepared by styrene (ST) and different boron compounds impregnated sapwood of Oriental beech (Fagus orientalis L.) Boric acid (BA), borax (BX) and their mixture (1:1; w/w) aqueous solutions at ...
Accelerated weathering performance of Scots pine preimpregnated with copper-based chemicals before varnish coating Part:1 coated with cellulosic and polyurethane varnishes
(Wiley, 2020)
This study aimed to determine the effect of accelerated weathering on gloss, surface hardness and colour changes of Scots pine (Pinus sylvestris L.). Test samples were impregnated with Adolit KD-5, Wolmanit CX-8 and Celcure ...
Increasing the physical and combustion performance of Oriental beech by impregnating borates and coating liquid glass
(ASSOC BRASIL POLIMEROS, 2021)
This study was designed to investigate physical properties such as color changes after weathering and water absorption (WA) levels, and combustion performance of borates-impregnated and LG-coated Oriental beech wood. Results ...
Some additional fields in this record are shown in regional languages from the following databases
(ASSOC BRASIL POLIMEROS, 2022)
In this study, the leaching performance of boron compounds from Oriental beech (Fagus orientalis L.) wood coated with polyurethane/polyurea (PUU) hybrid resin and epoxy resin (EPR) was investigated. Leaching of boron test ...
Investigation of some physical and mechanical properties of wood coated with plant-oil based epoxide nanocomposite materials
(Elsevier B.V., 2023)
Some mechanical and physical properties of wood from the Oriental beech (Fagus orientalis L.) coated with bio-based epoxide amine nanocoatings were investigated in this study. Firstly, plant oil-based epoxide (ETO) was ...