Ara
Toplam kayıt 12, listelenen: 1-10
Determination of the Strength of The Ready to Assemble Sofa Frames With Finite Element Analysis
(Gazi Univ, 2007)
In this study, the strength properties of screwed-without glue (demonte) jointed sofa frames constructed of solid wood and wood based (composite) materials were investigated. Furthermore, place of the stretcher was optimized ...
Bending moment capacity of rectangular mortise and tenon furniture joints
(Forest Products Soc, 2005)
This study investigated the effects of wood species, adhesive type, rail width, tenon depth, and tenon length oil bending strength and flexibility of mortise and tenon T-type end to side grain joints. Sugar maple, red oak, ...
Effects of screw sizes on load bearing capacity and stiffness of five-sided furniture cases constructed of particleboard and medium density fiberboard
(Forest Products Soc, 2008)
This study was carried out to determine the effects of the screw sizes and board material type oil the load bearing capacity and stiffness of five-sided furniture cases. Nine sizes of screws that included 3.5 by 40, 3.5 ...
Shear force and bending moment capacities of joints constructed with glued corner blocks
(Forest Products Soc, 2006)
Tests were carried out to determine the ultimate shear and bending moment capacities of glued corner blocks under controlled laboratory conditions. Yellow-poplar and sweetgum were utilized in constructing the joint specimens, ...
Design and construction of school work tables for developing countries
(Forest Products Soc, 2009)
Cyclic tests were conducted to determine the strength and durability of two types of school work tables designed for use in developing countries which were constructed with round mortise and tenon joints. The frames were ...
Theoretical analysis and design of joints in a representative sofa frame constructed of plywood and oriented strandboard
(Forest Products Soc, 2008)
Increasingly, plywood and oriented strandboard (OSB) are being used in the construction of upholstered furniture frames. There is little information available, however, concerning the strength of frames constructed with ...
Comparison of mechanical properties of solid wood and laminated veneer lumber fabricated from Turkish beech, Scotch pine, and Lombardy poplar
(Forest Products Soc, 2009)
Selected mechanical properties of laminated veneer lumber (LVL) prepared from Turkish beech (Fagus orientalis L.), Scotch pine (Pinus sylvestris L.), and Lombardy poplar (Populus nigra) veneers bonded with polyvinyl acetate ...
Withdrawal and bending strength of dowel-nuts in plywood and oriented strandboard
(Forest Products Soc, 2003)
Although through-bolts with dowel-nut fasteners are seldom used in upholstered furniture frame construction, they provide a means of constructing strong reliable joints in frames constructed of plywood and oriented ...
Moment resistance of multiscrew L-type corner joints
(Forest Products Soc, 2005)
This study investigated the effects of screw diameter and length, loading, board material, board surface condition, and gluing, on moment resistances of three-screw L-type corner joints. Wood-based composite panels utilized ...
Withdrawal strength and moment resistance of screwed T-type end-to-side grain furniture joints
(Forest Products Soc, 2004)
Tests were carried out to investigate the withdrawal strength and bending moment resistance of screwed T-type, end-to-side grain joints constructed of Turkish beech (Fagus Orientalis L.), European oak (Quercus petraea L.), ...