Ara
Toplam kayıt 31, listelenen: 11-20
Shear force and bending moment capacities of joints constructed with glued corner blocks
(Forest Products Soc, 2006)
Tests were carried out to determine the ultimate shear and bending moment capacities of glued corner blocks under controlled laboratory conditions. Yellow-poplar and sweetgum were utilized in constructing the joint specimens, ...
Staple holding strength of furniture frame joints constructed of plywood and oriented strandboard
(Forest Products Soc, 2003)
Staples are common in the construction of upholstered furniture. Staples are most common for the attachment of fabric to the frame, but they are also now being used in the construction of the frame itself because they ...
A comparative study on stability and decay resistance of some environmentally friendly fire-retardant boron compounds
(Springer, 2005)
Environmental concern accelerated development of new wood preservatives having low mammalian toxicity in addition to high protective effectiveness. PHN 130 and PHN 130 G have been developed recently by KOHMIX Ltd. in Japan ...
A new boron impregnation technique of wood by vapor boron of boric acid to reduce leaching boron from wood
(Springer, 2005)
This study was designed to reveal impregnation ability and to enhance leaching resistance of boron from borate-treated wood. Vapor boron treatment was applied in cornpressed and uncompressed states at high temperatures ...
Effect of the number of screws and screw size on moment capacity of furniture corner joints in case construction
(Forest Products Soc, 2008)
Tests were carried out in order to determine the bending moment capacity of L-type glued-screwed coner joints constructed with multiple screws. 6 sizes of screws were used for assembling the specimens. 2, 3, and 4 screws ...
School chairs for developing countries: Designing for strength and durability, simplicity, and ease of construction
(Forest Products Soc, 2003)
Persistent shortages of school furniture pose serious educational problems in underdeveloped and developing countries. Research has shown that strong durable school furniture can be produced with simple tools and production ...
Surface characteristics of wood pre-impregnated with borates before varnish coating
(Forest Products Soc, 2009)
Some surface characteristics of Calabrian pine (Pinus brutia Ten) pre-impregnated with borates before varnish coating were studied. Boric acid, borax, and sodium perborate were used as borates. An alkyd-based synthetic ...
Design and construction of school work tables for developing countries
(Forest Products Soc, 2009)
Cyclic tests were conducted to determine the strength and durability of two types of school work tables designed for use in developing countries which were constructed with round mortise and tenon joints. The frames were ...
Theoretical analysis and design of joints in a representative sofa frame constructed of plywood and oriented strandboard
(Forest Products Soc, 2008)
Increasingly, plywood and oriented strandboard (OSB) are being used in the construction of upholstered furniture frames. There is little information available, however, concerning the strength of frames constructed with ...
Estimation equations for moment resistances of L-type screw corner joints in case goods furniture
(Forest Products Soc, 2008)
The effects of the number of screws and screw sizes on bending moment resistance of L-type furniture corner joints constructed of particleboard (PB) and medium density fiberboard (MDF) with resin Surfacing were investigated ...