Ara
Toplam kayıt 52, listelenen: 21-30
Staple holding strength of furniture frame joints constructed of plywood and oriented strandboard
(Forest Products Soc, 2003)
Staples are common in the construction of upholstered furniture. Staples are most common for the attachment of fabric to the frame, but they are also now being used in the construction of the frame itself because they ...
DECAY RESISTANCE, PHYSICAL, MECHANICAL, AND THERMAL PROPERTIES OF HEATED ORIENTAL BEECH WOOD
(Slovak Forest Products Research Inst, 2015)
Heat treatment of Oriental beech (Fagus orientalis) wood was carried out by hot air in an oven for 2, 6, and 10 h at 125, 155, and 185 degrees C. After heat treatment; decay resistance, oven dry density, modulus of rupture ...
SURFACE CHARACTERISTICS OF ORIENTAL BEECH AND SCOTS PINE WOODS HEAT-TREATED ABOVE 200 degrees C
(Slovak Forest Products Research Inst, 2016)
Heat-treated of Oriental beech (Fagus orientalis L.) and Scots pine (Pinus sylvestris L.) woods were carried out by hot air in an oven for 1, 3, and 5 hours at 205, 220, and 235 degrees C. After heat treatments, some surface ...
Static Front to Back Loading Capacity of Wood Chairs and Relationship between Chair Strength and Individual Joint Strength
(North Carolina State Univ Dept Wood & Paper Sci, 2016)
The relationship between the static front to back loading capacity of chairs and the moment capacities of the joints used in their side frames was investigated. The secondary purpose of the study was to determine the effect ...
Ultimate Failure Load and Stiffness of Screw Jointed Furniture Cabinets Constructed of Particleboard and Medium-Density Fiberboard
(Forest Products Soc, 2011)
The objective of this study was to investigate the effects of material type, screw diameter, and screw length on ultimate failure load and stiffness of four-sided furniture cabinets. In total, 81 four-sided test cabinets ...
EFFECTS OF MICROCRYSTALLINE CELLULOSE ON SOME PERFORMANCE PROPERTIES OF CHITOSAN AEROGELS
(Universidad del Bio-Bio, 2021)
The aim of this research was to investigate the effect of the microcrystalline cellulose reinforcement on some physical, mechanical, thermal, and morphological properties of the chitosan aerogels. The bio-based chitosan ...
WEATHERING PROPERTIES OF SCOTS PINE TREATED WITH SOME CHEMICALS
(Slovak Forest Products Research Inst, 2017)
This study was aimed to investigate the gloss, surface hardness, surface roughness, and color changes of Scots pine that was treated with some chemicals after six months of weathering exposure. Chromated copper boron (CCB), ...
Numerical Analyses of Various Sizes of Mortise and Tenon Furniture Joints
(North Carolina State Univ Dept Wood & Paper Sci, 2016)
This study reports the moment resistance, stiffness, and numerical analysis of various sizes of round-end mortise and tenon joints. L-shaped and T-shaped specimens were constructed. Joints were manufactured using three ...
Some Physical and Mechanical Properties of Borate-Treated Oriental Beech Wood
(Zagreb Univ, Fac Forestry, 2015)
This study was designed to determine some physical properties such as surface roughness and oven dry density, and some mechanical properties such as modulus of elasticity (MOE) of borate-treated wood specimens. Wood specimens ...
Utilizing Poppy Husk-based Particleboards as an Alternative Material in Case Furniture Construction
(North Carolina State Univ Dept Wood & Paper Sci, 2017)
Particleboard can be defined as a wood-based panel produced under pressure and heat with the inclusion of wood particles or other lignocellulosic materials and an adhesive. The need for alternative resources to replace ...