Ara
Toplam kayıt 87, listelenen: 61-70
Exploratory study of small timber trusses constructed with through-bolt and cross-pipe heel connectors
(Forest Products Soc, 2007)
Throughout the world, there is a need for simple, strong, yet inexpensive connectors that can be used to fabricate trusses from natural small-diameter tree stems as well as squared stems without extensive premachining of ...
WEATHERING CHARACTERISTICS OF IMPREGNATED AND COATED CALABRIAN PINE WOOD
(Universidad del Bio-Bio, 2021)
This study was designed to investigate the weathering characteristics of Calabrian pine (Pinus brutia) wood. The wood specimens were impregnated with some copper-based chemicals and then varnish coated. As copper-based ...
Determination of the strength performance of chair frames constructed of solid wood and wood composites
(Forest Products Soc, 2006)
In this study, the strength properties of glued-doweled and screw jointed chair frames constructed of solid wood and wood-based (composite) materials were investigated. Scotch pine (Pinus Syivestris Lipsky) and Turkish ...
Withdrawal capacity of pinned and unpinned round mortise and tenon furniture joints
(Forest Products Soc, 2004)
Tests were conducted to determine the withdrawal capacity of cross-pinned round mortise and tenon joints. Tenon diameters ranged from a nominal 0.6 to 1.0 inches. Cross-pins were about one-half the diameter of the tenons. ...
Bending moment capacity of round mortise and tenon furniture joints
(Forest Products Soc, 2004)
Tests were conducted to determine the effect of cross pinning the tenons of round mortise and tenon joints on the bending moment capacity of the joints. Tenon diameters ranged from a nominal 0.6 to 1.0 inches. Cross-pins ...
SOME SURFACE CHARACTERISTICS OF VARNISHED THERMOWOOD AFTER WEATHERING
(Slovak Forest Products Research Inst, 2019)
This study was designed to investigate some surface characteristics such as glossiness and surface roughness changes of varnished thermowood after six months of weathering. Thermal modification of Scots pine (Pinus sylvestris ...
Some combustion parameters of wood impregnated with borates
(Forest Products Soc, 2009)
This study was conducted to determine some of the combustion parameters of Calabrian pine and Oriental beech treated with borates. Average mass loss and temperature values of Calabrian pine and Oriental beech wood were ...
Effect of hole diameter, hole distance from the edge, and material properties on lateral pin holding strength of medium density fiberboard and particleboard
(Forest Products Soc, 2004)
There is no established standard which evaluates the lateral holding resistance of wood composites. The method of test offered in this study intends to determine the lateral resistance of panels used in case constructions ...
SOME PHYSICAL CHARACTERISTICS OF THERMALLY MODIFIED ORIENTAL-BEECH WOOD
(Univ Bio-Bio, 2014)
Heat treatment of Oriental-beech (Fagus orientalis) wood was carried out by hot air in an oven for 2, 4, and 8 h at 140, 170, and 200 degrees C. After heat treatment, some physical characteristics such as surface roughness, ...
Some mechanical properties of wood impregnated with environmentally- friendly boron and copper based chemicals
(Slovak Forest Products Research Inst, 2013)
The aim of this study was made to determine some mechanical properties such as compression strength parallel to grain (CSPG), modulus of rupture (MOR), and modulus of elasticity (MOE) of wood treated with some boron and ...