Ara
Toplam kayıt 30, listelenen: 11-20
A comparative study on stability and decay resistance of some environmentally friendly fire-retardant boron compounds
(Springer, 2005)
Environmental concern accelerated development of new wood preservatives having low mammalian toxicity in addition to high protective effectiveness. PHN 130 and PHN 130 G have been developed recently by KOHMIX Ltd. in Japan ...
A new boron impregnation technique of wood by vapor boron of boric acid to reduce leaching boron from wood
(Springer, 2005)
This study was designed to reveal impregnation ability and to enhance leaching resistance of boron from borate-treated wood. Vapor boron treatment was applied in cornpressed and uncompressed states at high temperatures ...
Effect of the number of screws and screw size on moment capacity of furniture corner joints in case construction
(Forest Products Soc, 2008)
Tests were carried out in order to determine the bending moment capacity of L-type glued-screwed coner joints constructed with multiple screws. 6 sizes of screws were used for assembling the specimens. 2, 3, and 4 screws ...
Design and construction of school work tables for developing countries
(Forest Products Soc, 2009)
Cyclic tests were conducted to determine the strength and durability of two types of school work tables designed for use in developing countries which were constructed with round mortise and tenon joints. The frames were ...
Theoretical analysis and design of joints in a representative sofa frame constructed of plywood and oriented strandboard
(Forest Products Soc, 2008)
Increasingly, plywood and oriented strandboard (OSB) are being used in the construction of upholstered furniture frames. There is little information available, however, concerning the strength of frames constructed with ...
Comparison of mechanical properties of solid wood and laminated veneer lumber fabricated from Turkish beech, Scotch pine, and Lombardy poplar
(Forest Products Soc, 2009)
Selected mechanical properties of laminated veneer lumber (LVL) prepared from Turkish beech (Fagus orientalis L.), Scotch pine (Pinus sylvestris L.), and Lombardy poplar (Populus nigra) veneers bonded with polyvinyl acetate ...
Withdrawal and bending strength of dowel-nuts in plywood and oriented strandboard
(Forest Products Soc, 2003)
Although through-bolts with dowel-nut fasteners are seldom used in upholstered furniture frame construction, they provide a means of constructing strong reliable joints in frames constructed of plywood and oriented ...
Moment resistance of multiscrew L-type corner joints
(Forest Products Soc, 2005)
This study investigated the effects of screw diameter and length, loading, board material, board surface condition, and gluing, on moment resistances of three-screw L-type corner joints. Wood-based composite panels utilized ...
Surface properties of impregnated and varnished Scots pine wood after accelerated weathering
(Wiley, 2014)
In this study, the effect of accelerated weathering on the surface properties of Scots pine specimens impregnated with wolmanit-CB, tanalith-E, and adolit-KD5 and coated with synthetic and polyurethane varnishes was ...
Withdrawal strength and moment resistance of screwed T-type end-to-side grain furniture joints
(Forest Products Soc, 2004)
Tests were carried out to investigate the withdrawal strength and bending moment resistance of screwed T-type, end-to-side grain joints constructed of Turkish beech (Fagus Orientalis L.), European oak (Quercus petraea L.), ...