Ara
Toplam kayıt 52, listelenen: 31-40
School chairs for developing countries: Designing for strength and durability, simplicity, and ease of construction
(Forest Products Soc, 2003)
Persistent shortages of school furniture pose serious educational problems in underdeveloped and developing countries. Research has shown that strong durable school furniture can be produced with simple tools and production ...
Surface characteristics of wood pre-impregnated with borates before varnish coating
(Forest Products Soc, 2009)
Some surface characteristics of Calabrian pine (Pinus brutia Ten) pre-impregnated with borates before varnish coating were studied. Boric acid, borax, and sodium perborate were used as borates. An alkyd-based synthetic ...
Estimation equations for moment resistances of L-type screw corner joints in case goods furniture
(Forest Products Soc, 2008)
The effects of the number of screws and screw sizes on bending moment resistance of L-type furniture corner joints constructed of particleboard (PB) and medium density fiberboard (MDF) with resin Surfacing were investigated ...
SURFACE CHARACTERISTICS OF SCOTS PINE WOOD HEATED AT HIGH TEMPERATURES AFTER WEATHERING
(Slovak Forest Products Research Inst, 2017)
This study was conducted to investigate some surface properties of wood specimens of heat treated Scots pine (Pinus sylvestris L.) after weathering such as surface hardness, surface roughness, gloss, and color changes. ...
IMPROVING MECHANICAL AND PHYSICAL PROPERTIES OF PARTICLEBOARD MADE FROM VINE (VITIS VINIFERA L.) PRUNINGS BY ADDITION REINFORCEMENT MATERIALS
(Slovak Forest Products Research Inst, 2016)
The main goal of this study was to improve mechanical and physical properties of particleboards made from vine (Vitis vinjfera L.) prunings by addition of reinforcement materials. In Turkey, there are 462.000 hectare areas ...
Moment capacity of traditional and alternative T-type end-to-side-grain furniture joints
(Forest Products Soc, 2005)
The bending moment capacity of traditional and alternative T-type end-to-side-grain joints constructed of Oriental beech (Fagus orientalis Lipsky), European oak (Quercus borealis Lipsky), and Scotch pine (Pinus sylvestris ...
Withdrawal Force Capacity of T-Type Furniture Joints Constructed from Various Heat-treated Wood Species
(North Carolina State Univ Dept Wood & Paper Sci, 2017)
The withdrawal force capacities were compared for T-type furniture joints made from heat-treated Siberian pine (Pinus sibirica), iroko (Chlorophora excelsa), and common ash (Fraxinus excelsior), which are commonly used in ...
Mechanical Properties of Externally Invisible Furniture Joints Made of Wood-Based Composites
(North Carolina State Univ Dept Wood & Paper Sci, 2016)
The aim of this investigation was to design and determine the mechanical properties of innovative, externally invisible, 3D-printed cabinet furniture joints that can be assembled without the use of tools. The cognitive ...
Thermal Analysis of Polyamide 6 Composites Filled by Natural Fiber Blend
(North Carolina State Univ Dept Wood & Paper Sci, 2016)
This study describes changes in the viscoelastic and thermal properties of composites made with various percentages (up to 20 wt.%) of a natural fiber blend (a mixture of flax, kenaf, and hemp fibers) and polyamide 6 (PA ...
Exploratory study of small timber trusses constructed with through-bolt and cross-pipe heel connectors
(Forest Products Soc, 2007)
Throughout the world, there is a need for simple, strong, yet inexpensive connectors that can be used to fabricate trusses from natural small-diameter tree stems as well as squared stems without extensive premachining of ...