Ara
Toplam kayıt 86, listelenen: 31-40
THERMAL ANALYSIS OF ORIENTAL BEECH WOOD TREATED WITH SOME BORATES AS FIRE RETARDANTS
(Univ Bio-Bio, 2016)
Wood is widely used as a construction material for many applications. To have knowledge about the thermal degradation characteristic of wood could be crucial for indoor and outdoor applications. Chemical treatments could ...
Shear force and bending moment capacities of joints constructed with glued corner blocks
(Forest Products Soc, 2006)
Tests were carried out to determine the ultimate shear and bending moment capacities of glued corner blocks under controlled laboratory conditions. Yellow-poplar and sweetgum were utilized in constructing the joint specimens, ...
Bending Moment Capacities of L-Shaped Mortise and Tenon Joints under Compression and Tension Loadings
(North Carolina State Univ Dept Wood & Paper Sci, 2015)
Tests were carried out to determine the bending moment capacities of L-shaped mortise and tenon furniture joints under both compression and tension loadings. The effects of wood species (Turkish beech and Scotch pine), ...
SOME PROPERTIES OF TURKISH SWEETGUM BALSAM (STYRAX LIQUIDUS) IMPREGNATED ORIENTAL BEECH WOOD PART I: PHYSICAL PROPERTIES
(Slovak Forest Products Research Inst, 2015)
The purpose of this study was to investigate some physical properties such as water absorption (WA), color, gloss, and surface hardness changes of Oriental beech (Fagus orientalis L.) wood impregnated with Turlcish sweetgum ...
Staple holding strength of furniture frame joints constructed of plywood and oriented strandboard
(Forest Products Soc, 2003)
Staples are common in the construction of upholstered furniture. Staples are most common for the attachment of fabric to the frame, but they are also now being used in the construction of the frame itself because they ...
DECAY RESISTANCE, PHYSICAL, MECHANICAL, AND THERMAL PROPERTIES OF HEATED ORIENTAL BEECH WOOD
(Slovak Forest Products Research Inst, 2015)
Heat treatment of Oriental beech (Fagus orientalis) wood was carried out by hot air in an oven for 2, 6, and 10 h at 125, 155, and 185 degrees C. After heat treatment; decay resistance, oven dry density, modulus of rupture ...
A comparative study on stability and decay resistance of some environmentally friendly fire-retardant boron compounds
(Springer, 2005)
Environmental concern accelerated development of new wood preservatives having low mammalian toxicity in addition to high protective effectiveness. PHN 130 and PHN 130 G have been developed recently by KOHMIX Ltd. in Japan ...
A new boron impregnation technique of wood by vapor boron of boric acid to reduce leaching boron from wood
(Springer, 2005)
This study was designed to reveal impregnation ability and to enhance leaching resistance of boron from borate-treated wood. Vapor boron treatment was applied in cornpressed and uncompressed states at high temperatures ...
Effect of the number of screws and screw size on moment capacity of furniture corner joints in case construction
(Forest Products Soc, 2008)
Tests were carried out in order to determine the bending moment capacity of L-type glued-screwed coner joints constructed with multiple screws. 6 sizes of screws were used for assembling the specimens. 2, 3, and 4 screws ...
SURFACE CHARACTERISTICS OF ORIENTAL BEECH AND SCOTS PINE WOODS HEAT-TREATED ABOVE 200 degrees C
(Slovak Forest Products Research Inst, 2016)
Heat-treated of Oriental beech (Fagus orientalis L.) and Scots pine (Pinus sylvestris L.) woods were carried out by hot air in an oven for 1, 3, and 5 hours at 205, 220, and 235 degrees C. After heat treatments, some surface ...