Ara
Toplam kayıt 86, listelenen: 51-60
Theoretical analysis and design of joints in a representative sofa frame constructed of plywood and oriented strandboard
(Forest Products Soc, 2008)
Increasingly, plywood and oriented strandboard (OSB) are being used in the construction of upholstered furniture frames. There is little information available, however, concerning the strength of frames constructed with ...
Estimation equations for moment resistances of L-type screw corner joints in case goods furniture
(Forest Products Soc, 2008)
The effects of the number of screws and screw sizes on bending moment resistance of L-type furniture corner joints constructed of particleboard (PB) and medium density fiberboard (MDF) with resin Surfacing were investigated ...
SURFACE CHARACTERISTICS OF SCOTS PINE WOOD HEATED AT HIGH TEMPERATURES AFTER WEATHERING
(Slovak Forest Products Research Inst, 2017)
This study was conducted to investigate some surface properties of wood specimens of heat treated Scots pine (Pinus sylvestris L.) after weathering such as surface hardness, surface roughness, gloss, and color changes. ...
Comparison of mechanical properties of solid wood and laminated veneer lumber fabricated from Turkish beech, Scotch pine, and Lombardy poplar
(Forest Products Soc, 2009)
Selected mechanical properties of laminated veneer lumber (LVL) prepared from Turkish beech (Fagus orientalis L.), Scotch pine (Pinus sylvestris L.), and Lombardy poplar (Populus nigra) veneers bonded with polyvinyl acetate ...
IMPROVING MECHANICAL AND PHYSICAL PROPERTIES OF PARTICLEBOARD MADE FROM VINE (VITIS VINIFERA L.) PRUNINGS BY ADDITION REINFORCEMENT MATERIALS
(Slovak Forest Products Research Inst, 2016)
The main goal of this study was to improve mechanical and physical properties of particleboards made from vine (Vitis vinjfera L.) prunings by addition of reinforcement materials. In Turkey, there are 462.000 hectare areas ...
Withdrawal and bending strength of dowel-nuts in plywood and oriented strandboard
(Forest Products Soc, 2003)
Although through-bolts with dowel-nut fasteners are seldom used in upholstered furniture frame construction, they provide a means of constructing strong reliable joints in frames constructed of plywood and oriented ...
Moment resistance of multiscrew L-type corner joints
(Forest Products Soc, 2005)
This study investigated the effects of screw diameter and length, loading, board material, board surface condition, and gluing, on moment resistances of three-screw L-type corner joints. Wood-based composite panels utilized ...
Surface properties of impregnated and varnished Scots pine wood after accelerated weathering
(Wiley, 2014)
In this study, the effect of accelerated weathering on the surface properties of Scots pine specimens impregnated with wolmanit-CB, tanalith-E, and adolit-KD5 and coated with synthetic and polyurethane varnishes was ...
Withdrawal strength and moment resistance of screwed T-type end-to-side grain furniture joints
(Forest Products Soc, 2004)
Tests were carried out to investigate the withdrawal strength and bending moment resistance of screwed T-type, end-to-side grain joints constructed of Turkish beech (Fagus Orientalis L.), European oak (Quercus petraea L.), ...
Moment capacity of traditional and alternative T-type end-to-side-grain furniture joints
(Forest Products Soc, 2005)
The bending moment capacity of traditional and alternative T-type end-to-side-grain joints constructed of Oriental beech (Fagus orientalis Lipsky), European oak (Quercus borealis Lipsky), and Scotch pine (Pinus sylvestris ...