Ara
Toplam kayıt 8, listelenen: 1-8
LOWER TOLERANCE LIMIT APPROACH TO EQUATION-BASED RATIONAL DESIGN VALUES FOR L-SHAPED MORTISE AND TENON JOINTS
(Soc Wood Sci Technol, 2017)
Statistical lower tolerance limits (LTLs) were computed for the ratios obtained by dividing the test values for 360 L-shaped rectangular mortise and tenon joints consisting of 72 different configurations of five specimens ...
TECHNICAL NOTE: LOWER TOLERANCE LIMIT APPROACH TO EQUATION-BASED RATIONAL DESIGN VALUES FOR T-SHAPED MORTISE AND TENON JOINTS
(Soc Wood Sci Technol, 2017)
A nonlinear regression expression was fitted to the test data obtained from a study of the bending moment capacity of 320 rectangular T-shaped mortise and tenon furniture joints consisting of 64 configurations of five ...
RELATIONSHIP BETWEEN STATIC AND CYCLIC FRONT TO BACK LOAD CAPACITY OF WOODEN CHAIRS, AND EVALUATION OF THE STRENGTH VALUES ACCORDING TO ACCEPTABLE DESIGN VALUES
(Soc Wood Sci Technol, 2018)
Tests were carried out to investigate the relationship between static and cyclic strength of wooden chairs. Furthermore, cyclic front to back load performance of chairs were compared with acceptable design loads that were ...
Bending Moment Capacities of L-Shaped Mortise and Tenon Joints under Compression and Tension Loadings
(North Carolina State Univ Dept Wood & Paper Sci, 2015)
Tests were carried out to determine the bending moment capacities of L-shaped mortise and tenon furniture joints under both compression and tension loadings. The effects of wood species (Turkish beech and Scotch pine), ...
Static Front to Back Loading Capacity of Wood Chairs and Relationship between Chair Strength and Individual Joint Strength
(North Carolina State Univ Dept Wood & Paper Sci, 2016)
The relationship between the static front to back loading capacity of chairs and the moment capacities of the joints used in their side frames was investigated. The secondary purpose of the study was to determine the effect ...
Ultimate Failure Load and Stiffness of Screw Jointed Furniture Cabinets Constructed of Particleboard and Medium-Density Fiberboard
(Forest Products Soc, 2011)
The objective of this study was to investigate the effects of material type, screw diameter, and screw length on ultimate failure load and stiffness of four-sided furniture cabinets. In total, 81 four-sided test cabinets ...
Numerical Analyses of Various Sizes of Mortise and Tenon Furniture Joints
(North Carolina State Univ Dept Wood & Paper Sci, 2016)
This study reports the moment resistance, stiffness, and numerical analysis of various sizes of round-end mortise and tenon joints. L-shaped and T-shaped specimens were constructed. Joints were manufactured using three ...
Utilizing Poppy Husk-based Particleboards as an Alternative Material in Case Furniture Construction
(North Carolina State Univ Dept Wood & Paper Sci, 2017)
Particleboard can be defined as a wood-based panel produced under pressure and heat with the inclusion of wood particles or other lignocellulosic materials and an adhesive. The need for alternative resources to replace ...