Ara
Toplam kayıt 9, listelenen: 1-9
RELATIONSHIP BETWEEN STATIC AND CYCLIC FRONT TO BACK LOAD CAPACITY OF WOODEN CHAIRS, AND EVALUATION OF THE STRENGTH VALUES ACCORDING TO ACCEPTABLE DESIGN VALUES
(Soc Wood Sci Technol, 2018)
Tests were carried out to investigate the relationship between static and cyclic strength of wooden chairs. Furthermore, cyclic front to back load performance of chairs were compared with acceptable design loads that were ...
Experimental and numerical analysis of mounting force of auxetic dowels for furniture joints
(Elsevier Ltd, 2021)
Limited number of papers describe the practical use of auxetics in the wood and furniture sector. Only one paper describes the auxetic nails. None of them analyzed the impact of using auxetics on the strength of furniture ...
Static Front to Back Loading Capacity of Wood Chairs and Relationship between Chair Strength and Individual Joint Strength
(North Carolina State Univ Dept Wood & Paper Sci, 2016)
The relationship between the static front to back loading capacity of chairs and the moment capacities of the joints used in their side frames was investigated. The secondary purpose of the study was to determine the effect ...
Numerical Analyses of Various Sizes of Mortise and Tenon Furniture Joints
(North Carolina State Univ Dept Wood & Paper Sci, 2016)
This study reports the moment resistance, stiffness, and numerical analysis of various sizes of round-end mortise and tenon joints. L-shaped and T-shaped specimens were constructed. Joints were manufactured using three ...
Utilizing Poppy Husk-based Particleboards as an Alternative Material in Case Furniture Construction
(North Carolina State Univ Dept Wood & Paper Sci, 2017)
Particleboard can be defined as a wood-based panel produced under pressure and heat with the inclusion of wood particles or other lignocellulosic materials and an adhesive. The need for alternative resources to replace ...
Shear Force Capacities of H-Type Furniture Joints Constructed of Various Heat-Treated Wood Species
(ZAGREB UNIV, 2023)
The aim of this study was to investigate the effect of wood species, heat treatment, adhesive type and joint technique on shear force capacity of H-type furniture joints. For this purpose, an experimental design that ...
Optimization of the Cross-Sectional Geometry of Auxetic Dowels for Furniture Joints
(PMC, 2023)
In this study, the aim was to optimize the cross-sectional geometry of auxetic dowels for furniture joints. For this purpose, two different sizes of auxetic dowels were chosen, one for frame- and the other for panel-type ...
Strength Classification of Wooden Chairs under Cyclic Loads Based on an Experimental Study
(Multidisciplinary Digital Publishing Institute (MDPI), 2023)
This study aimed to assess the cyclic load capacity of wooden chairs and subsequently categorize them based on their performance. A diverse selection of chair models was randomly procured from commercial markets. These ...
Analysis of the internal mounting forces and strength of newly designed fastener to joints wood and wood-based panels
(MDPI, 2021)
This study aimed to numerically and experimentally analyze the effects of internal mounting forces and selected materials on the stiffness and bending moment capacity of L-type corner joints connected with novelty-designed ...