Ara
Toplam kayıt 15, listelenen: 1-10
TECHNICAL NOTE: LOWER TOLERANCE LIMIT APPROACH TO EQUATION-BASED RATIONAL DESIGN VALUES FOR T-SHAPED MORTISE AND TENON JOINTS
(Soc Wood Sci Technol, 2017)
A nonlinear regression expression was fitted to the test data obtained from a study of the bending moment capacity of 320 rectangular T-shaped mortise and tenon furniture joints consisting of 64 configurations of five ...
Effects of cross-sectional shape on the bending strength in furniture joints
(Kastamonu Univ, Orman Fak, 2018)
Aim of the study: Tests were carried out to evaluate the ultimate bending strength of the circular and square cross sectioned furniture joint members and find out whether the form factor is applicable to the small specimens ...
Effect of shoulders on bending moment capacity of round mortise and tenon joints
(Forest Products Soc, 2006)
Tests were conducted to determine the effect of close-fitting shoulders on the bending moment capacity of round mortise and tenon joints. Results indicate that close-fitting shoulders can substantially increase the strength ...
RELATIONSHIP BETWEEN STATIC AND CYCLIC FRONT TO BACK LOAD CAPACITY OF WOODEN CHAIRS, AND EVALUATION OF THE STRENGTH VALUES ACCORDING TO ACCEPTABLE DESIGN VALUES
(Soc Wood Sci Technol, 2018)
Tests were carried out to investigate the relationship between static and cyclic strength of wooden chairs. Furthermore, cyclic front to back load performance of chairs were compared with acceptable design loads that were ...
Montaja hazır koltuk iskeletlerinin mukavemetinin sonlu elemanlar analizi ile belirlenmesi
(2007)
Bu çalışmada, ağaç ve ağaç esaslı (kompozit) malzemelerden tutkalsız-vidalı (demonte) olarak üretilmiş koltuk iskeletlerinin mukavemet özellikleri araştırılmıştır. Ayrıca, koltuk yan düzlem çerçevesinde, ara kayıtın yeri ...
Staple holding strength of furniture frame joints constructed of plywood and oriented strandboard
(Forest Products Soc, 2003)
Staples are common in the construction of upholstered furniture. Staples are most common for the attachment of fabric to the frame, but they are also now being used in the construction of the frame itself because they ...
Ultimate Failure Load and Stiffness of Screw Jointed Furniture Cabinets Constructed of Particleboard and Medium-Density Fiberboard
(Forest Products Soc, 2011)
The objective of this study was to investigate the effects of material type, screw diameter, and screw length on ultimate failure load and stiffness of four-sided furniture cabinets. In total, 81 four-sided test cabinets ...
Numerical Analyses of Various Sizes of Mortise and Tenon Furniture Joints
(North Carolina State Univ Dept Wood & Paper Sci, 2016)
This study reports the moment resistance, stiffness, and numerical analysis of various sizes of round-end mortise and tenon joints. L-shaped and T-shaped specimens were constructed. Joints were manufactured using three ...
Utilizing Poppy Husk-based Particleboards as an Alternative Material in Case Furniture Construction
(North Carolina State Univ Dept Wood & Paper Sci, 2017)
Particleboard can be defined as a wood-based panel produced under pressure and heat with the inclusion of wood particles or other lignocellulosic materials and an adhesive. The need for alternative resources to replace ...
School chairs for developing countries: Designing for strength and durability, simplicity, and ease of construction
(Forest Products Soc, 2003)
Persistent shortages of school furniture pose serious educational problems in underdeveloped and developing countries. Research has shown that strong durable school furniture can be produced with simple tools and production ...