Ara
Toplam kayıt 71, listelenen: 11-20
Effect of shoulders on bending moment capacity of round mortise and tenon joints
(Forest Products Soc, 2006)
Tests were conducted to determine the effect of close-fitting shoulders on the bending moment capacity of round mortise and tenon joints. Results indicate that close-fitting shoulders can substantially increase the strength ...
RELATIONSHIP BETWEEN STATIC AND CYCLIC FRONT TO BACK LOAD CAPACITY OF WOODEN CHAIRS, AND EVALUATION OF THE STRENGTH VALUES ACCORDING TO ACCEPTABLE DESIGN VALUES
(Soc Wood Sci Technol, 2018)
Tests were carried out to investigate the relationship between static and cyclic strength of wooden chairs. Furthermore, cyclic front to back load performance of chairs were compared with acceptable design loads that were ...
IImpact of uv irradiance on selected parameters of scots pine impregnated with some commonly used fire- retardants
(Slovak Forest Products Research Inst, 2019)
This study was designed to determine some selected parameters such as gloss, surface roughness, and color changes of Scots pine wood impregnated with commonly used fire-retardant (FR) chemicals after UV irradiance. Sodium ...
Determination of the color stability of an environmetally-frienlywood stain from saffron (CROCUS SATIVUS L.) extrakts under uv exposure
(Slovak Forest Products Research Inst, 2009)
This study was designed to develop an environmentally friendly wood stain by natural pigments from saffron (Crocus sativus L.) and determine the color stability of this stain to UV light irradiation. Wood stains derived ...
Verniklenmiş ağaç malzemenin yanma özellikleri ve borlu bileşiklerle ön emprenye işleminin yanmayı geciktirici etkisi
(2003)
Bu çalışma, poliüretan ve sentetik vernik türleri ile muamele edilen kızılcam (Pinus brutia Ten.) ve cennet ağacı odunu (Ailanthus altissima Mili. swingle) deney örneklerinde, yanma özelliklerinin belirlenmesi ve vernikleme ...
An investigation of some physical and mechanical properties of laminated veneer lumber manufactured from black alder (Alnus glutinosa) glued with polyvinyl acetate and polyurethane adhesives
(Forest Products Soc, 2006)
This study was designed to determine some physical and mechanical properties of laminated veneer lumber (LVL) made of black alder (Alnus glutinosa). Veneers were prepared from 2-mm and 4-mm-thick black alder and glued using ...
Bazı masif ve kompozit ağaç malzemelerin kavela tutma performanslarının belirlenmesi
(2007)
Bu çalışmada; bazı masif ve kompozit ağaç malzemelerin, kenardan ve yüzeyden kavela tutma performanslarının belirlenmesi amaçlanmıştır. Deneylerde ağaç malzemelerden Doğu kayını (Fagus orientalis Lipsky) ve sarıçam (Pinus ...
Çeşitli ağaç ve otsu bitki ekstarklarından çevre ile uyumlu doğal renklendirici ve koruyucu ağaç üstyüzey işlem boyalarının geliştirilmesi ve renk değerlerinin belirlenmesi
(2006)
Bu çalışmada; çeşitli ağaç ve bitki ekstraktlarından su-bazlı ahşap boyama maddelerinin elde edilmesi amaçlanmıştır. Bu amaçla; sarıçam (Pinus sylvestris) ve Doğu kayını (Fagus orientalis) odunlarından elde edilen deney ...
Determination of the color stability of an environmentally friendly wood stain derived from laurel (Laurus nobilis L.) leaf extracts under UV exposure
(Forest Products Soc, 2008)
This study was designed to develop an environmentally friendly wood stain derived from laurel (Laurus nobilis L.) and determine the color stability of this stain when exposed to UV light irradiation. Wood stains derived ...
Masif ve Lamine ağaç malzemelerin (LAM) Alyan Vida tutma mukavemeti
(2009)
Bu çalışmada, farklı ağaç türlerinden hazırlanan, polivinilasetat (PVAc) ve üre-formaldehit (ÜF) tutkallarıyla yapıştırılmış lamine malzemelerin (LVL), liflere dik ve paralel doğrultudaki alyan vida tutma performansları, ...