Ara
Toplam kayıt 533, listelenen: 471-480
Staple holding strength of furniture frame joints constructed of plywood and oriented strandboard
(Forest Products Soc, 2003)
Staples are common in the construction of upholstered furniture. Staples are most common for the attachment of fabric to the frame, but they are also now being used in the construction of the frame itself because they ...
A comparative study on stability and decay resistance of some environmentally friendly fire-retardant boron compounds
(Springer, 2005)
Environmental concern accelerated development of new wood preservatives having low mammalian toxicity in addition to high protective effectiveness. PHN 130 and PHN 130 G have been developed recently by KOHMIX Ltd. in Japan ...
INCIDENTAL RELEASE OF BITUMEN DURING OIL SHALE GRINDING AND IMPACTS ON OIL SHALE BENEFICIATION
(Estonian Academy Publishers, 2009)
The particle surface characteristics of oil shale and the changes in these characteristics with increasing fineness were determined. FTIR and electro-kinetic studies showed that the surfaces of oil shale particle were ...
A new boron impregnation technique of wood by vapor boron of boric acid to reduce leaching boron from wood
(Springer, 2005)
This study was designed to reveal impregnation ability and to enhance leaching resistance of boron from borate-treated wood. Vapor boron treatment was applied in cornpressed and uncompressed states at high temperatures ...
Measurement and comparison of complex impedance of silicon p-i-n photodiodes at different temperatures
(Maik Nauka/Interperiodica/Springer, 2007)
The dark alternating current (ac) parameters of BPW34 and BPW41 (Vishay-Telefunken) silicon p-i-n photodiodes arc measured and compared at different temperatures using the impedance spectroscopy technique. The impedance ...
Effect of the number of screws and screw size on moment capacity of furniture corner joints in case construction
(Forest Products Soc, 2008)
Tests were carried out in order to determine the bending moment capacity of L-type glued-screwed coner joints constructed with multiple screws. 6 sizes of screws were used for assembling the specimens. 2, 3, and 4 screws ...
Sepiolite-PAN intercalation used as Si3N4 forming precursor
(Kluwer Academic Publ, 2001)
Silicon nitride (Si3N4) formation was investigated using sepiolite and polyacrylonitrile as silicon and carbon source, respectively. It was found that purified sepiolite could readily adsorb a sufficient amount of acrylonitrile ...
Design, performance, and calibration of CMS forward calorimeter wedges
(Springer, 2008)
We report on the test beam results and calibration methods using high energy electrons, pions and muons with the CMS forward calorimeter (HF). The HF calorimeter covers a large pseudorapidity region (3 <= vertical bar eta ...
An engineered second disulfide bond restricts lymphotactin/XCL1 to a chemokine-like conformation with XCR1 agonist activity
(Amer Chemical Soc, 2007)
Chemokines adopt a conserved tertiary structure stabilized by two disulfide bridges and direct the migration of leukocytes. Lymphotactin (Ltn) is a unique chemokine in that it contains only one disulfide and exhibits ...