Ara
Toplam kayıt 28, listelenen: 1-10
LOWER TOLERANCE LIMIT APPROACH TO EQUATION-BASED RATIONAL DESIGN VALUES FOR L-SHAPED MORTISE AND TENON JOINTS
(Soc Wood Sci Technol, 2017)
Statistical lower tolerance limits (LTLs) were computed for the ratios obtained by dividing the test values for 360 L-shaped rectangular mortise and tenon joints consisting of 72 different configurations of five specimens ...
TECHNICAL NOTE: LOWER TOLERANCE LIMIT APPROACH TO EQUATION-BASED RATIONAL DESIGN VALUES FOR T-SHAPED MORTISE AND TENON JOINTS
(Soc Wood Sci Technol, 2017)
A nonlinear regression expression was fitted to the test data obtained from a study of the bending moment capacity of 320 rectangular T-shaped mortise and tenon furniture joints consisting of 64 configurations of five ...
Effects of cross-sectional shape on the bending strength in furniture joints
(Kastamonu Univ, Orman Fak, 2018)
Aim of the study: Tests were carried out to evaluate the ultimate bending strength of the circular and square cross sectioned furniture joint members and find out whether the form factor is applicable to the small specimens ...
Bending moment capacity of rectangular mortise and tenon furniture joints
(Forest Products Soc, 2005)
This study investigated the effects of wood species, adhesive type, rail width, tenon depth, and tenon length oil bending strength and flexibility of mortise and tenon T-type end to side grain joints. Sugar maple, red oak, ...
Effect of shoulders on bending moment capacity of round mortise and tenon joints
(Forest Products Soc, 2006)
Tests were conducted to determine the effect of close-fitting shoulders on the bending moment capacity of round mortise and tenon joints. Results indicate that close-fitting shoulders can substantially increase the strength ...
RELATIONSHIP BETWEEN STATIC AND CYCLIC FRONT TO BACK LOAD CAPACITY OF WOODEN CHAIRS, AND EVALUATION OF THE STRENGTH VALUES ACCORDING TO ACCEPTABLE DESIGN VALUES
(Soc Wood Sci Technol, 2018)
Tests were carried out to investigate the relationship between static and cyclic strength of wooden chairs. Furthermore, cyclic front to back load performance of chairs were compared with acceptable design loads that were ...
Montaja hazır koltuk iskeletlerinin mukavemetinin sonlu elemanlar analizi ile belirlenmesi
(2007)
Bu çalışmada, ağaç ve ağaç esaslı (kompozit) malzemelerden tutkalsız-vidalı (demonte) olarak üretilmiş koltuk iskeletlerinin mukavemet özellikleri araştırılmıştır. Ayrıca, koltuk yan düzlem çerçevesinde, ara kayıtın yeri ...
Shear force and bending moment capacities of joints constructed with glued corner blocks
(Forest Products Soc, 2006)
Tests were carried out to determine the ultimate shear and bending moment capacities of glued corner blocks under controlled laboratory conditions. Yellow-poplar and sweetgum were utilized in constructing the joint specimens, ...
Staple holding strength of furniture frame joints constructed of plywood and oriented strandboard
(Forest Products Soc, 2003)
Staples are common in the construction of upholstered furniture. Staples are most common for the attachment of fabric to the frame, but they are also now being used in the construction of the frame itself because they ...
Ultimate Failure Load and Stiffness of Screw Jointed Furniture Cabinets Constructed of Particleboard and Medium-Density Fiberboard
(Forest Products Soc, 2011)
The objective of this study was to investigate the effects of material type, screw diameter, and screw length on ultimate failure load and stiffness of four-sided furniture cabinets. In total, 81 four-sided test cabinets ...