Ara
Toplam kayıt 90, listelenen: 11-20
Ağaç levhalardan yapılan vidalı birleştirmeli rafların yüzeye dik (lateral) yük taşıma performansları
(2004)
Bu çalışmada mobilya üretiminde yaygın olarak kullanılan orta yoğunlukta lif levha (MDF) ve yonga levhadan (YL) üretilen vidalı konstrüksiyonların raf yüzeyine dik (lateral) yüklere karşı dayanımı araştırılmıştır. Bu amaçla ...
Determination of the Strength of Various Sofa Frames with Finite Element Analysis
(Gazi Univ, 2006)
In this study, the strength properties of glued-dowel joined sofa frames constructed of solid wood and wood based composite materials were investigated. Furthermore, the place of the stretcher was optimized in the side ...
Bending Strength of Screwed Corner Joints with Different Materials
(Gazi Univ, 2006)
Tests were carried out in order to determine the bending strength with compression and tension force with and without glue in addition to screws on furniture corner joints in a construction case. The specimens were prepared ...
Effect of shoulders on bending moment capacity of round mortise and tenon joints
(Forest Products Soc, 2006)
Tests were conducted to determine the effect of close-fitting shoulders on the bending moment capacity of round mortise and tenon joints. Results indicate that close-fitting shoulders can substantially increase the strength ...
RELATIONSHIP BETWEEN STATIC AND CYCLIC FRONT TO BACK LOAD CAPACITY OF WOODEN CHAIRS, AND EVALUATION OF THE STRENGTH VALUES ACCORDING TO ACCEPTABLE DESIGN VALUES
(Soc Wood Sci Technol, 2018)
Tests were carried out to investigate the relationship between static and cyclic strength of wooden chairs. Furthermore, cyclic front to back load performance of chairs were compared with acceptable design loads that were ...
IImpact of uv irradiance on selected parameters of scots pine impregnated with some commonly used fire- retardants
(Slovak Forest Products Research Inst, 2019)
This study was designed to determine some selected parameters such as gloss, surface roughness, and color changes of Scots pine wood impregnated with commonly used fire-retardant (FR) chemicals after UV irradiance. Sodium ...
Determination of the color stability of an environmetally-frienlywood stain from saffron (CROCUS SATIVUS L.) extrakts under uv exposure
(Slovak Forest Products Research Inst, 2009)
This study was designed to develop an environmentally friendly wood stain by natural pigments from saffron (Crocus sativus L.) and determine the color stability of this stain to UV light irradiation. Wood stains derived ...
An investigation of some physical and mechanical properties of laminated veneer lumber manufactured from black alder (Alnus glutinosa) glued with polyvinyl acetate and polyurethane adhesives
(Forest Products Soc, 2006)
This study was designed to determine some physical and mechanical properties of laminated veneer lumber (LVL) made of black alder (Alnus glutinosa). Veneers were prepared from 2-mm and 4-mm-thick black alder and glued using ...
Çeşitli ağaç ve otsu bitki ekstarklarından çevre ile uyumlu doğal renklendirici ve koruyucu ağaç üstyüzey işlem boyalarının geliştirilmesi ve renk değerlerinin belirlenmesi
(2006)
Bu çalışmada; çeşitli ağaç ve bitki ekstraktlarından su-bazlı ahşap boyama maddelerinin elde edilmesi amaçlanmıştır. Bu amaçla; sarıçam (Pinus sylvestris) ve Doğu kayını (Fagus orientalis) odunlarından elde edilen deney ...
Determination of the color stability of an environmentally friendly wood stain derived from laurel (Laurus nobilis L.) leaf extracts under UV exposure
(Forest Products Soc, 2008)
This study was designed to develop an environmentally friendly wood stain derived from laurel (Laurus nobilis L.) and determine the color stability of this stain when exposed to UV light irradiation. Wood stains derived ...