Başlık için Metalurji ve Malzeme Mühendisliği Bölümü Koleksiyonu listeleme
Toplam kayıt 79, listelenen: 37-56
-
The influence of nitridation time on the structural properties of GaN grown on Si (111) substrate
(Springer Heidelberg, 2009)In the present paper, the effect of in-situ substrate nitridation time on crystalline quality of GaN films grown on Si (111) substrates by metal organic chemical vapor deposition (MOCVD) were investigated. A thin buffer ... -
Influence of two-step austempering at different temperatures on mechanical and microstructural properties of AISI 9254 high silicon steel
(Taylor and Francis Ltd., 2023)This study was undertaken to understand the effects of two-step austempering treatment on an AISI 9254 high silicon steel towards tailoring the properties as desired while simultaneously employing the benefits of high and ... -
Investigation into Ca-Doped LaMnCoO3 Perovskite Oxides for Thermochemical Water Splitting
(Springer, 2022)Two-step thermochemical water splitting (II-TWS), involving concentrating sunlight, has become prominent for green hydrogen production that does not require H2/O2 separation steps at high temperatures. The kinetics and ... -
Investigation of temperature dependent magnetization and elastic modulus in Si-doped Fe65Ni35 invar alloys
(Elsevier Science Sa, 2017)Fe-65 Ni-35 invar is a prominent nickel steel alloy exhibiting low coefficient of thermal expansion around room temperature. The present work deals with the temperature dependence of the elastic modulus and magnetization ... -
Investigations of the Friction and Wear Resistance of the Natural Fiber-Reinforced Polyamide Composites
(wiley, 2023)The search for natural and biobased materials to create a sustainable future has led many scientists to conduct research on natural-fiber-reinforced composites. Natural fibers have been used for thousands of years, but in ... -
Large magnetocaloric effects in magnetic intermetallics: First-principles and Monte Carlo studies
(E D P Sciences, 2015)We have performed ab initio electronic structure calculations and Monte Carlo simulations of frustrated ferroic materials where complex magnetic configurations and chemical disorder lead to rich phase diagrams. With lowering ... -
Magnetic and structural instabilities in mictomagnetic Cu50Mn45Al5 against the formation of ferromagnetic precipitates
(Pergamon-Elsevier Science Ltd, 2020)A new property of Heusler alloys known as shell-ferromagnetism is observed predominantly in NiMn-based Heusler alloys with X as Ga, Al, In and Sn. An antiferromagnetic-matrix/shell-ferromagnetic precipitate dual-phase ... -
Magnetic properties of fcc and ? phases in equiatomic and off-equiatomic high-entropy Cantor alloys
(AMER PHYSICAL SOC, 2023)The equiatomic face-centered-cubic (fcc) high-entropy alloy CrMnFeCoNi has a valence electron concentra-tion of 8 electrons per atom, equivalent to that of Fe. Its ground-state properties are similar to that of fcc-Fe and ... -
Magnetic properties of the FCC and BCC phases of (MnFeCoNi)(80)Cu(20_x)Z(x()Z(1)& nbsp;Al, Ga) high-entropy alloys
(PERGAMON-ELSEVIER SCIENCE LTD, 2023)In this work, the FCC-BCC phase transition in (MnFeCoNi)80Cu20 (Al, Ga) high entropy alloys were investigated on the basis of structural, magnetic, hardness and thermal expansion properties. It is found that the equiatomic ... -
Magnetic proximity effect and shell-ferromagnetism in metastable Ni50Mn45Ga5
(Amer Inst Physics, 2016)The present study on magnetic and structural properties of Ni(50)Mn(45)G(a)5 confirms that structural metastability is an inherent property of Ni50Mn50-xXx Heusler alloys with X as In, Ga, and Sn. The ternary alloy transforms ... -
Mechanical and microstructural evaluation of solid-state foamed Ti6Al4V-ELI alloy
(Elsevier B.V., 2022)Metallic materials adopted in biomedical applications play a key role in the replacement of so-called "hard tissues" (the human bone). Titanium (Ti) alloy prostheses are considered the best among all metallic implants due ... -
Mechanical characterization of highly porous beta-Si3N4 ceramics fabricated via partial sintering & starch addition
(Elsevier Sci Ltd, 2013)In this study, porous beta-Si3N4 ceramics containing limited amount of Sm2O3 and CaO as sintering aids were produced by addition of potato starch (10 and 20 vol.%) and partial sintering. Two different Si3N4 powders, alpha- ... -
Metal ve seramik tozlarının bilgisayar kontrollü tek eksenli kalıpta preslenmesi
(1999)This study is about the investigation of the mechanical properties of metal and ceramic powders pressed by a uniaxial die. The bronze powders have spherical particles, copper powders are of oval, iron powders are of porous ... -
Morphology effect on electrochemical properties of doped (W and Mo) 622NMC, 111NMC, and 226NMC cathode materials
(Pergamon-Elsevier Science Ltd, 2020)An investigation was carried out on layered Li(NixMnyCo1-x-y)O-2 (NMC) cathode active materials for Li-ion batteries to determine the effect of morphology on their electrochemical performances. The NMC active materials ... -
Nanoporous surface modification of 316L support materials by electrochemical dealloying
(INDERSCIENCE ENTERPRISES LTD, 2022)The current study involves electroplating and dealloying processes applied sequentially to form a nanoporous Ni layer on 316L support material to produce a suitable substrate that enables thin film (< 1 mu m) deposition. ... -
Nb-Pd-Ti BCC thin films for hydrogen separation
(Elsevier Science Sa, 2019)An investigation was carried out into Nb-Pd-Ti ternary system to determine possible body-centered cubic (b.c.c.) membranes that can be used for hydrogen separation. A library of thin films was produced covering the greater ... -
Neutron diffraction and symmetry analysis of the martensitic transformation in Co-doped Ni2MnGa
(Amer Physical Soc, 2020)Martensitic transformations are strain driven displacive transitions governing the mechanical and physical properties in intermetallic materials. This is the case in Ni2MnGa, where the martensite transition is at the heart ... -
A new generation of highly customized Mg alloy-based implants
(Elsevier B.V., 2022)In the last years, the precision and personalized medicine is pushing the biomedical research efforts towards the direction of implant surgery requiring only 1-step approach: this goal has been achieved after the introduction ... -
Non-volatile high-temperature shell-magnetic pinning of Ni-Mn-Sn Heusler precipitates obtained by decomposition under magnetic field
(Elsevier Science Bv, 2018)The thermodynamic instability of the off-stoichiometric Ni49.8Mn45.1Sn5.1 martensitic Heusler causes it to decompose into ferromagnetic Ni50Mn25Sn25 precipitates and an antiferromagnetic NiMn matrix. If the decomposition ... -
Optical, electrical and microstructural properties of SiC thin films deposited by reactive dc magnetron sputtering
(Elsevier Science Sa, 2019)In this study, amorphous silicon carbide (SiC) thin films of variable compositions were deposited on Si (100) and glass substrates by reactive direct current magnetron sputtering of high purity silicon target, using CH4 ...