dc.contributor.author | Tavsanoglu, T. | |
dc.contributor.author | Jeandin, M. | |
dc.contributor.author | Addemir, O. | |
dc.date.accessioned | 2020-11-20T15:03:21Z | |
dc.date.available | 2020-11-20T15:03:21Z | |
dc.date.issued | 2016 | |
dc.identifier.issn | 0267-0844 | |
dc.identifier.issn | 1743-2944 | |
dc.identifier.uri | https://doi.org/10.1080/02670844.2016.1143197 | |
dc.identifier.uri | https://hdl.handle.net/20.500.12809/2710 | |
dc.description | WOS: 000381104100006 | en_US |
dc.description.abstract | In this study, about 400 nm thick BCN films with different compositions were grown by reactive DC magnetron sputtering of a B4C target by varying the N-2/Ar proportion in the sputtering gas from 0 to 50%. The microstructures of the films were determined by FE-SEM. The chemical composition was determined by electron probe microanalyser (EPMA). The crystallinity of the films was studied by grazing incidence XRD analyses. FTIR was used to determine the chemical bonding structures. The elemental depth profiles of the films were obtained from SIMS measurements. Nanoindentation and wear tests were used to determine the mechanical and tribological properties. Hardness, elastic modulus and wear rates of BCN films were significantly decreased with the increase of nitrogen in the coating composition. The results demonstrated that thin films in the ternary triangle B-C-N with tailored properties can easily be deposited by reactive DC magnetron sputtering with varying N-2 flow rates. | en_US |
dc.item-language.iso | eng | en_US |
dc.publisher | Taylor & Francis Ltd | en_US |
dc.item-rights | info:eu-repo/semantics/closedAccess | en_US |
dc.subject | BCN Thin Films | en_US |
dc.subject | Reactive DC Magnetron Sputtering | en_US |
dc.subject | Microstructural Properties | en_US |
dc.subject | Nanomechanical Properties | en_US |
dc.subject | Wear Properties | en_US |
dc.title | Synthesis and characterisation of thin films in the B-C-N triangle | en_US |
dc.item-type | article | en_US |
dc.contributor.department | MÜ | en_US |
dc.contributor.departmentTemp | [Tavsanoglu, T.] Mugla Sitki Kocman Univ, Dept Met & Mat Engn, TR-48000 Kotekli, Mugla, Turkey -- [Jeandin, M.] MINES ParisTech, Ctr Mat PM Fourt, CNRS UMR 7633, BP 87, F-91003 Evry, France -- [Addemir, O.] Istanbul Tech Univ, Dept Met & Mat Engn, TR-34469 Istanbul, Turkey | en_US |
dc.identifier.doi | 10.1080/02670844.2016.1143197 | |
dc.identifier.volume | 32 | en_US |
dc.identifier.issue | 10 | en_US |
dc.identifier.startpage | 755 | en_US |
dc.identifier.endpage | 760 | en_US |
dc.relation.journal | Surface Engineering | en_US |
dc.relation.publicationcategory | Makale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı | en_US |