Basit öğe kaydını göster

dc.contributor.authorEfe, Hasan
dc.contributor.authorKasal, Ali
dc.contributor.authorCagatay, Kubulay
dc.contributor.authorKuskun, Tolga
dc.date.accessioned2020-11-20T16:33:15Z
dc.date.available2020-11-20T16:33:15Z
dc.date.issued2012
dc.identifier.issn1303-2399
dc.identifier.urihttps://hdl.handle.net/20.500.12809/4281
dc.descriptionCagatay, Kubulay/0000-0003-1973-4736;en_US
dc.descriptionWOS: 000410028400007en_US
dc.description.abstractIn this study, withdrawal strengths of T-type furniture joints prepared from different wood species and connected with different joint methods were compared. Specimens were constructed of Turkish beech (Fagus orientalis L.), Scotch pine (Pinus sylvestris L.), Sessile oak (Quercus petraea Liebl), Anatolian chestnut (Castanea sativa Mill) and Common Walnut (Juglans regia L.). Dowel and mortise and tenon joints were considered as glued joints, while screwed joint, minifix and maxifix joints were considered as without glue joints. In the glued joints, polyvinylacetate (PVAc) and polyurethane (Pu) adhesives were utilized. A total of 350 specimens that included 5 wood species, 7 joint methods, and 10 replications for each were prepared and tested under static direct withdrawal loads. As a result of the tests, the highest withdrawal strengths were obtained with oak while the lowest withdrawal strengths were obtained with scotch pine and Anatolian chestnut. Mortise and tenon joints were showed the best results while minifix and maxifix joints were yielded the worst among the connection types. For glued joints, PVAc gave higher values than Pu and mortise and tenon joints gave better results than dowel joints.en_US
dc.item-language.isoturen_US
dc.publisherKastamonu Univ, Orman Faken_US
dc.item-rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectT-Type Jointsen_US
dc.subjectDowel Jointen_US
dc.subjectMortise and Tenon Jointen_US
dc.subjectScrew Jointen_US
dc.subjectMinifixen_US
dc.subjectMaxifixen_US
dc.titleEffects of Different Joint Techniques on Withdrawal Strength of T-Type Furniture Jointsen_US
dc.item-typearticleen_US
dc.contributor.departmenten_US
dc.contributor.departmentTemp[Efe, Hasan] Gazi Univ, Teknol Fak, Agacisleri End Muhendisligi Bolumu, Ankara, Turkey -- [Kasal, Ali; Kuskun, Tolga] Mugla Univ, Teknol Fak, Agacisleri End Muhendisligi Bolumu, Mugla, Turkey -- [Cagatay, Kubulay] Incirli Tekn & Endust Meslek Lisesi, Mobilya & Ic Mekan Tasarimi Alani, Ankara, Turkeyen_US
dc.identifier.volume12en_US
dc.identifier.issue2en_US
dc.identifier.startpage251en_US
dc.identifier.endpage260en_US
dc.relation.journalKastamonu University Journal of Forestry Facultyen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US


Bu öğenin dosyaları:

DosyalarBoyutBiçimGöster

Bu öğe ile ilişkili dosya yok.

Bu öğe aşağıdaki koleksiyon(lar)da görünmektedir.

Basit öğe kaydını göster