Basit öğe kaydını göster

dc.contributor.authorDuygulu, Ozgur
dc.contributor.authorUcuncuoglu, Selda
dc.contributor.authorOktay, Gizem
dc.contributor.authorYucel, Onuralp
dc.contributor.authorKaya, Ali Arslan
dc.date.accessioned2020-11-20T16:34:33Z
dc.date.available2020-11-20T16:34:33Z
dc.date.issued2010
dc.identifier.isbn978-0-87339-746-9
dc.identifier.issn1545-4150
dc.identifier.urihttps://hdl.handle.net/20.500.12809/4669
dc.descriptionMagnesium Technology Symposium 2010 - FEB 14-18, 2010 - Seattle, WAen_US
dc.descriptionKaya, Ali Arslan/0000-0002-4467-3456; Duygulu, Ozgur/0000-0001-8646-0363; Duygulu, Ozgur/0000-0001-8646-0363; Yucel, Onuralp/0000-0002-3879-0410en_US
dc.descriptionWOS: 000281445500090en_US
dc.description.abstract6 mm thick and 1500 mm wide magnesium alloy AZ91 sheet was produced by twin roll casting. Sheets were homogenized between 350-475 degrees C for 1-24 h. Afterwards, they were warm rolled down to 2.75 mm. Age hardening was also performed on twin roll cast AZ91 alloy sheets. Specimens were aged at 150, 200 and 250 degrees C for up to 100 h. Characterization was performed by light microscope, TEM-EDS, and XRD after twin roll casting and also after each thermomechanical process including aging. Tensile tests were performed for mechanical properties. Moreover, the age-hardening response of Mg AZ91 alloy was examined by micro hardness test.en_US
dc.description.sponsorshipState Planning Department of TurkeyTurkiye Cumhuriyeti Kalkinma Bakanligien_US
dc.description.sponsorshipThis study is one part of the project titled Magnesium Technologies for Automotive, Bio-medical and Defense Applications-5045510 Supported by State Planning Department of Turkey. Authors would like to express their gratitude to Vedat Gungoren, Osman Ozcan and Ulvi Uzunoglu (VIG Makina) for their contributions in carrying out twin roll casting process.en_US
dc.item-language.isoengen_US
dc.publisherMinerals, Metals & Materials Socen_US
dc.relation.ispartofseriesMagnesium Technology Series
dc.item-rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectMagnesium Alloyen_US
dc.subjectAZ91en_US
dc.subjectTwin Roll Castingen_US
dc.subjectAgingen_US
dc.subjectThermomechanical Processesen_US
dc.titleEFFECT OF AGING AND THERMOMECHANICAL PROCESSES IN TWIN ROLL CAST MG AZ91 ALLOY SHEETen_US
dc.item-typeconferenceObjecten_US
dc.contributor.departmenten_US
dc.contributor.departmentTemp[Duygulu, Ozgur; Ucuncuoglu, Selda; Oktay, Gizem] Mat Inst, TUBITAK MRC, POB 21, TR-41470 Gebze, Kocaeli, Turkey -- [Yucel, Onuralp] Istanbul Tech Univ, Dept Met & Mat Engn, TR-34469 Istanbul, Turkey -- [Kaya, Ali Arslan] Mugla Univ, Fac Engn, Dept Met & Mat, TR-48000 Mugla, Turkeyen_US
dc.identifier.startpage527en_US
dc.identifier.endpage+en_US
dc.relation.journalMagnesium Technology 2010en_US
dc.relation.publicationcategoryKonferans Öğesi - Uluslararası - Kurum Öğretim Elemanıen_US


Bu öğenin dosyaları:

DosyalarBoyutBiçimGöster

Bu öğe ile ilişkili dosya yok.

Bu öğe aşağıdaki koleksiyon(lar)da görünmektedir.

Basit öğe kaydını göster