Development of 1500MM wide wrought magnesium alloys by twin roll casting technique in Turkey [Conference Paper]
| dc.contributor.author | Duygulu, O. | |
| dc.contributor.author | Ucuncuoglu, S. | |
| dc.contributor.author | Oktay, G. | |
| dc.contributor.author | Temur, D.S. | |
| dc.contributor.author | Yucel, O. | |
| dc.contributor.author | Kaya, A.A. | |
| dc.date.accessioned | 2020-11-20T16:46:52Z | |
| dc.date.available | 2020-11-20T16:46:52Z | |
| dc.date.issued | 2009 | |
| dc.identifier.isbn | 9780873397308 | |
| dc.identifier.issn | 1545-4150 | |
| dc.identifier.uri | https://hdl.handle.net/20.500.12809/5779 | |
| dc.description | Magnesium Committee of the Light Metals Division; Minerals, Metals and Materials Society, TMS | en_US |
| dc.description | Magnesium Technology 2009, 15 February 2009 through 19 February 2009, San Francisco, CA, 76923 | en_US |
| dc.description.abstract | Magnesium alloy AZ31, AZ61, AZ91, AM50 and AM60 sheets were produced by twin roll casting first time in Turkey. Sheets of 4.5-6.5mm thick and 1500mm width were successfully achieved. Microstructure of the sheet was analyzed by optical microscope, scanning electron microscope (SEM) and transmission electron microscope (TEM). Semi-quantitative analyses were performed by SEM-EDS. In addition, X-ray studies were performed for both characterization and texture purposes. Mechanical properties were investigated by tensile tests and also hardness measurements. Homogenization and annealing heat treatments were performed on the produced sheets. | en_US |
| dc.item-language.iso | eng | en_US |
| dc.item-rights | info:eu-repo/semantics/closedAccess | en_US |
| dc.subject | AM50 | en_US |
| dc.subject | AM60 | en_US |
| dc.subject | AZ31 | en_US |
| dc.subject | AZ61 | en_US |
| dc.subject | AZ91 | en_US |
| dc.subject | Magnesium Alloy | en_US |
| dc.subject | Twin Roll Casting | en_US |
| dc.title | Development of 1500MM wide wrought magnesium alloys by twin roll casting technique in Turkey [Conference Paper] | en_US |
| dc.item-type | conferenceObject | en_US |
| dc.contributor.department | MÜ | en_US |
| dc.contributor.departmentTemp | Duygulu, O., TUBITAK MRC, Materials Institute, P.O.B. 21, Gebze, Kocaeli 41470, Turkey -- [Ucuncuoglu, S., TUBITAK MRC, Materials Institute, P.O.B. 21, Gebze, Kocaeli 41470, Turkey -- [Oktay, G., TUBITAK MRC, Materials Institute, P.O.B. 21, Gebze, Kocaeli 41470, Turkey -- [Temur, D.S., TUBITAK MRC, Materials Institute, P.O.B. 21, Gebze, Kocaeli 41470, Turkey -- [Yucel, O., Istanbul Technical University, Department of Metallurgical and Materials Engineering, Istanbul 34469, Turkey -- [Kaya, A.A., TUBITAK MRC, Materials Institute, P.O.B. 21, Gebze, Kocaeli 41470, Turkey, Mugla University, Engineering Faculty, Department of Metallurgy and Materials, Kotekli, Mugla 48000, Turkey | en_US |
| dc.identifier.startpage | 385 | en_US |
| dc.identifier.endpage | 390 | en_US |
| dc.relation.journal | Magnesium Technology | en_US |
| dc.relation.publicationcategory | Konferans Öğesi - Uluslararası - Kurum Öğretim Elemanı | en_US |
Bu öğenin dosyaları:
| Dosyalar | Boyut | Biçim | Göster |
|---|---|---|---|
|
Bu öğe ile ilişkili dosya yok. |
|||
