Basit öğe kaydını göster

dc.contributor.authorBaysal, E.
dc.contributor.authorDegirmentepe, S.
dc.contributor.authorToker, H.
dc.contributor.authorTurkoglu, T.
dc.date.accessioned2020-11-20T16:48:59Z
dc.date.available2020-11-20T16:48:59Z
dc.date.issued2014
dc.identifier.issn1336-4561
dc.identifier.urihttps://hdl.handle.net/20.500.12809/6089
dc.description.abstractThe purpose of this study is to determine some mechanical properties such as modulus of rupture (MOR) and some physical properties such as glossiness, color, surface roughness, and water absorption (WA) of adolit-KD 5 (AD-KD 5) impregnated and then heat treated of Scots pine {Pinus sylvestris L.) wood specimens. Heat treatment of Scots pine {Pinus sylvestris L.) wood was carried out by hot air in an oven for 2, 4, and 8 h at 150 and 175°C. Before the heat treatments, wood specimens were impregnated with 3% aqueous solution of AD-KD 5 which is a copper based chemical according to ASTM D 413-76. While MOR, glossiness, and colors of wood specimens impregnated with AD KD 5 were lower than that of the un-impregnated control specimen, WA of Scots pine impregnated with AD KD 5 was higher than that of the un-impregnated control specimen before heat treatments. Also, AD KD 5 impregnation caused an increase in surface roughness of Scots pine before the heat treatments. Results showed that oven heat-treated wood became darker in tone. While, a* coordinate (red component) increased as temperature increased, b* coordinate decreased at temperatures tested. As a result of heat treatment, a decrease was observed in MOR, WA, glossiness, and surface roughness of Scots pine wood specimens. Moreover, increasing treatment temperature and duration, resulted in decreasing values of MOR, WA, glossiness, and surface roughness.en_US
dc.item-language.isoengen_US
dc.publisherStatny Drevarsky Vyskumny Ustaven_US
dc.item-rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectHeat treatmenten_US
dc.subjectImpregnationen_US
dc.subjectMechanical properties physical propertiesen_US
dc.titleSome mechanical and physical properties of AD-KD 5 impregnated and thermallymodified scots pine wooden_US
dc.item-typearticleen_US
dc.contributor.departmenten_US
dc.contributor.departmentTempBaysal, E., Mugla Sltki Kocman University, Faculty of Technology, Department of Wood Science and Technology, Mugla, Turkey; Degirmentepe, S., Mugla Sltki Kocman University, Faculty of Technology, Department of Wood Science and Technology, Mugla, Turkey; Toker, H., Mugla Sltki Kocman University, Faculty of Technology, Department of Wood Science and Technology, Mugla, Turkey; Turkoglu, T., Mugla Sitki Kocman University, Koycegiz Vocational School, Department of Forestry, Mugla, Turkeyen_US
dc.identifier.volume59en_US
dc.identifier.issue2en_US
dc.identifier.startpage283en_US
dc.identifier.endpage296en_US
dc.relation.journalWood Researchen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US


Bu öğenin dosyaları:

DosyalarBoyutBiçimGöster

Bu öğe ile ilişkili dosya yok.

Bu öğe aşağıdaki koleksiyon(lar)da görünmektedir.

Basit öğe kaydını göster