Search
Now showing items 31-40 of 66
EFFECT OF MATERIAL PROPERTIES AND ANCHORAGE LOCATION ON LOAD-BEARING CAPACITY OF SCREW-CONNECTED AND HUNG CABINETS
(Soc Wood Sci Technol, 2014)
Effects of material type and thickness of selected wood-based composites for construction of cabinets and anchorage location of screws attaching cabinets to the wall on the vertical load-bearing capacity of four-sided wall ...
Shear Force Capacity of Various Doweled Frame Type Furniture Joints
(Kastamonu Univ, Orman Fak, 2013)
Tests were carried out to determine the ultimate shear force capacity of numerous of doweled frame type furniture joints under controlled laboratory conditions. Sugar maple (Acer saccharum), soft maple (Acer negund), yellow ...
Shear Force Capacity of H-Type Case Furniture Joints Connected with Solid Wood and Plastic Dowels
(Kastamonu Univ, Orman Fak, 2012)
In this study, shear force capacity of H-type case furniture corner joints connected with dowels were investigated. Specimens were constructed of 16 and 18 mm particleboard (YL) and medium density fiberboard (MDF). In ...
Comparison of The Withdrawal Strength of Different Joint Techniques for Wooden End To End Joints
(Kastamonu Univ, Orman Fak, 2012)
In this study, withdrawal strengths of end to end joints prepared from different wood species and connected with different techniques were compared. Specimens were constructed of Turkish beech (Fagus orientalis L.), Scotch ...
Effect of Joint Technique on Moment Capacity of L-Type Furniture Corner Joints for Case Furniture Constructed
(Kastamonu Univ, Orman Fak, 2014)
In this study, effects of joint technique and material type on moment capacity of case furniture "L" type comer joints under diagonal tensile and compression loads was aimed to determine. The specimens were prepared from ...
Effect of the Panel Type and Panel Thickness on Moment Resistance of Screw-Jointed Corner Joints and Stiffness of Four-Member Cabinets
(North Carolina State Univ Dept Wood & Paper Sci, 2014)
The objective of this study was to investigate the effects of panel type and panel thickness on moment resistance of L-type corner joints and deflection characteristics of four-member cabinets. Three different wood based ...
Determination of the Bending Strength and Modulus of Elasticity of Solid Wood and Laminated Veneer Lumber
(Gazi Univ, 2010)
In this study, bending strength (MOR) and modulus of elasticity (MOE) of the laminated veneer lumber (LVL) and solid wood materials which are constructed of different wood species were determined. Solid wood and LVL ...
Allen Screw Withdrawal Strength of Solid Wood and Laminated Veneer Lumber (LVL)
(Kastamonu Univ, Orman Fak, 2009)
In this study, the allen screw holding performances in perpendicular to grain and parallel to grain of laminated veneer lumber (LVL) prepared of different wood species with polyvinylacetate (PVAc) and ure formaldehyde (UF) ...
Effects of screw sizes on load bearing capacity and stiffness of five-sided furniture cases constructed of particleboard and medium density fiberboard
(Forest Products Soc, 2008)
This study was carried out to determine the effects of the screw sizes and board material type oil the load bearing capacity and stiffness of five-sided furniture cases. Nine sizes of screws that included 3.5 by 40, 3.5 ...
Bazı masif ve kompozit ağaç malzemelerin kavela tutma performanslarının belirlenmesi
(2007)
Bu çalışmada; bazı masif ve kompozit ağaç malzemelerin, kenardan ve yüzeyden kavela tutma performanslarının belirlenmesi amaçlanmıştır. Deneylerde ağaç malzemelerden Doğu kayını (Fagus orientalis Lipsky) ve sarıçam (Pinus ...
