Ara
Toplam kayıt 21, listelenen: 1-10
Determination of the Strength of The Ready to Assemble Sofa Frames With Finite Element Analysis
(Gazi Univ, 2007)
In this study, the strength properties of screwed-without glue (demonte) jointed sofa frames constructed of solid wood and wood based (composite) materials were investigated. Furthermore, place of the stretcher was optimized ...
Determination of Some Physical and Mechanical Properties of Various Wood and Wood Composite Materials
(Gazi Univ, 2007)
In this study, some technical properties needed in engineering design of furniture of some solid wood and wood composite materials were determined according to related standards. Turkish beech (Fagus Orientalis Lipsky) and ...
BENDING MOMENT AND SHEAR FORCE CAPACITIES OF THE T-TYPE DOWELED FURNITURE JOINTS REINFORCED WITH DIFFERENT SIZES OF CORNER BLOCKS
(Gazi Univ, Fac Engineering Architecture, 2008)
In this study, effects of the corner block dimensions on moment and shear force capacities for T-type glued doweled furniture joints were investigated. Specimens were prepared of Turkish beech (Fagus orientalis Lipsky) and ...
Determination of the Strength of Various Sofa Frames with Finite Element Analysis
(Gazi Univ, 2006)
In this study, the strength properties of glued-dowel joined sofa frames constructed of solid wood and wood based composite materials were investigated. Furthermore, the place of the stretcher was optimized in the side ...
Bending Strength of Screwed Corner Joints with Different Materials
(Gazi Univ, 2006)
Tests were carried out in order to determine the bending strength with compression and tension force with and without glue in addition to screws on furniture corner joints in a construction case. The specimens were prepared ...
Allen Screw Withdrawal Strength of Solid Wood and Laminated Veneer Lumber (LVL)
(Kastamonu Univ, Orman Fak, 2009)
In this study, the allen screw holding performances in perpendicular to grain and parallel to grain of laminated veneer lumber (LVL) prepared of different wood species with polyvinylacetate (PVAc) and ure formaldehyde (UF) ...
Effects of screw sizes on load bearing capacity and stiffness of five-sided furniture cases constructed of particleboard and medium density fiberboard
(Forest Products Soc, 2008)
This study was carried out to determine the effects of the screw sizes and board material type oil the load bearing capacity and stiffness of five-sided furniture cases. Nine sizes of screws that included 3.5 by 40, 3.5 ...
Bazı masif ve kompozit ağaç malzemelerin kavela tutma performanslarının belirlenmesi
(2007)
Bu çalışmada; bazı masif ve kompozit ağaç malzemelerin, kenardan ve yüzeyden kavela tutma performanslarının belirlenmesi amaçlanmıştır. Deneylerde ağaç malzemelerden Doğu kayını (Fagus orientalis Lipsky) ve sarıçam (Pinus ...
Masif ve Lamine ağaç malzemelerin (LAM) Alyan Vida tutma mukavemeti
(2009)
Bu çalışmada, farklı ağaç türlerinden hazırlanan, polivinilasetat (PVAc) ve üre-formaldehit (ÜF) tutkallarıyla yapıştırılmış lamine malzemelerin (LVL), liflere dik ve paralel doğrultudaki alyan vida tutma performansları, ...
Montaja hazır koltuk iskeletlerinin mukavemetinin sonlu elemanlar analizi ile belirlenmesi
(2007)
Bu çalışmada, ağaç ve ağaç esaslı (kompozit) malzemelerden tutkalsız-vidalı (demonte) olarak üretilmiş koltuk iskeletlerinin mukavemet özellikleri araştırılmıştır. Ayrıca, koltuk yan düzlem çerçevesinde, ara kayıtın yeri ...