Ara
Toplam kayıt 48, listelenen: 11-20
RELATIONSHIP BETWEEN STATIC AND CYCLIC FRONT TO BACK LOAD CAPACITY OF WOODEN CHAIRS, AND EVALUATION OF THE STRENGTH VALUES ACCORDING TO ACCEPTABLE DESIGN VALUES
(Soc Wood Sci Technol, 2018)
Tests were carried out to investigate the relationship between static and cyclic strength of wooden chairs. Furthermore, cyclic front to back load performance of chairs were compared with acceptable design loads that were ...
Comparison of Some Physical and Mechanical Properties of Polyvinil Cloride (Pvc) Panels As An Alternative toConventional Case Furniture Materials
(Kastamonu Univ, Orman Fak, 2013)
In this study, physical and mechanical properties of polyvinyl chloride (PVC) panels that is commonly produced and used and expected to be an alternative material for panel (case) furniture manufacturing was determined and ...
Comparison of the Moment Capacity of Case Furniture Corner Joints Connected with Solid Wood and Plastic Dowels
(Gazi Univ, 2012)
In this study, moment capacity of L-type corner joints connected with dowels were compared. Specimens were constructed of 16 and 18 mm particleboard (YL) and medium density fiberboard (MDF). In constructing the joints, ...
Bending Moment Capacities of Case Furniture Corner Joints Fabricated From Polyvnil Cloride (Pvc) Panels as an Alternative Materials
(Kastamonu Univ, Orman Fak, 2013)
In this study, bending moment capacities of L- type corner joints farbricated from polyvinyl chloride (PVC) panels that are commonly produced and used and expected to be an alternative material for case (panel) furniture ...
Effects of Different Joint Techniques on Withdrawal Strength of T-Type Furniture Joints
(Kastamonu Univ, Orman Fak, 2012)
In this study, withdrawal strengths of T-type furniture joints prepared from different wood species and connected with different joint methods were compared. Specimens were constructed of Turkish beech (Fagus orientalis ...
BENDING MOMENT CAPACITY OF L-TYPE FURNITURE CORNER JOINTS CONSTRUCTED OF PARTICLEBOARD PRODUCED FROM VINE PRUNING RESIDUES
(Slovak Forest Products Research Inst, 2014)
Tests were carried out to investigate the utilization of vineyard pruning residues in panel products as a structural material for manufacturing of the furniture cases. For this purpose, bending moment capacities of L-type ...
The Effects of Wood Species and Joint Technique on Bending Moment Capacity and Elasticity of T-type Furniture Joints
(Gazi Univ, 2012)
In this study, bending moment capacities and elasticity of T-type furniture joints prepared from different wood species and connected with different techniques were compared. Specimens were constructed of Turkish beech ...
Determination of Pulling Force Performances of T-Type Joint Elements Prepared with Some Laminated Veneer Lumber
(Kastamonu Univ, Orman Fak, 2011)
In this study, tension force performance of T-type furniture joints with laminated veneer lumber prepared from domestic and tropical wood were compared. In the experiments, three different types of laminated veneer lumber ...
EFFECT OF MATERIAL PROPERTIES AND ANCHORAGE LOCATION ON LOAD-BEARING CAPACITY OF SCREW-CONNECTED AND HUNG CABINETS
(Soc Wood Sci Technol, 2014)
Effects of material type and thickness of selected wood-based composites for construction of cabinets and anchorage location of screws attaching cabinets to the wall on the vertical load-bearing capacity of four-sided wall ...
Shear Force Capacity of Various Doweled Frame Type Furniture Joints
(Kastamonu Univ, Orman Fak, 2013)
Tests were carried out to determine the ultimate shear force capacity of numerous of doweled frame type furniture joints under controlled laboratory conditions. Sugar maple (Acer saccharum), soft maple (Acer negund), yellow ...