Browsing Enerji Sistemleri Mühendisliği Bölümü Koleksiyonu by Issue Date
Now showing items 1-20 of 104
-
Experimental and analytical investigation of the ITU TRIGA Mark-II reactor core
(Carl Hanser Verlag, 2003)Experimental and analytical studies have been performed to determine the temperature distribution as a function of reactor power in the TRIGA Mark-II reactor at the Istanbul Technical University (ITU). The lumped parameter ... -
Dose assessment around the Yatagan coal-fired power plant due to gross alpha-radioactivity levels in flying ash
(Kluwer Academic Publ, 2003)The gross alpha-radioactivity levels in ash wastes from the Yatagan coal-fired power plant have been measured, and radiation dose calculations have been carried out, by the computer code CAP88-PC, around the plant environment ... -
Educational and consciousness-raising movements for renewable energy in Turkey
(Sila Science, 2009)Turkey has some difficulties in meeting its energy need due to rapid industrialization and population growth. It is necessary to educate and raise the consciousness level of the future generations to use the renewable ... -
Sipping tests for the irradiated fuel elements of the TR-2 research reactor
(Carl Hanser Verlag, 2011)Sipping tests have been performed for fuel elements of the TR-2 reactor at Cekmece Nuclear Research and Training Center (CNRTC), in order to find out which one failed in the core. A sipping assembly has been constructed ... -
Sea Water Effect on Failure Behaviour of Mechanically Fastened Composites
(Carl Hanser Verlag, 2013)In this study, sea water effect on failure behaviour was investigated for mechanically fastened composites that are oriented as [0/90/45/-60](s). The laminated composite specimens were fastened with two serial fasteners ... -
Conventional and advanced exergoeconomic analyses of geothermal district heating systems
(Elsevier Science Sa, 2014)The present study deals with analyzing, assessing and comparing conventional and advanced exergoeconomic analyses to identify the direction and potential for energy savings of a geothermal district heating system in future ... -
An economic comparison and evaluation of two geothermal district heating systems for advanced exergoeconomic analysis
(Pergamon-Elsevier Science Ltd, 2014)This paper refers to an economic comparison and evaluation of two geothermal district heating systems (GDHSs) under same reference state condition and mechanic/economic parameters by using an advanced exergoeconomic analysis. ... -
Determination of optimum insulation thickness in pipe for exergetic life cycle assessment
(Pergamon-Elsevier Science Ltd, 2015)The energy saving and the environmental impacts' reduction in the world building sector have gained great importance. Therefore, great efforts have been invested to create energy-saving green buildings. To do so, one of ... -
Three dimensional stress analysis of adhesively bonded and multi pinned metal matrix composite plates
(Carl Hanser Verlag, 2015)In this study, stress analyses have been performed for adhesively bonded and multi pinned metal matrix composite plates. The joint can be defined as hybrid structure providing various aims such as increasing loading capacity, ... -
Event-Driven Molecular Dynamics Simulation of Hard-Sphere Gas Flows in Microchannels
(Hindawi Ltd, 2015)Classical solution of Navier-Stokes equations with nonslip boundary condition leads to inaccurate predictions of flow characteristics of rarefied gases confined in micro/nanochannels. Therefore, molecular interaction based ... -
Thermodynamic evaluation of a geothermal power plant for advanced exergy analysis
(Pergamon-Elsevier Science Ltd, 2015)As a result of decreasing fossil fuel resources and their adverse impacts on the environment, interest in renewable energy resources, particularly geothermal energy, has been revived. Finding approaches that are more ... -
Exergoenvironmental analysis for a geothermal district heating system: An application
(Pergamon-Elsevier Science Ltd, 2016)Energy sources are of great importance in relation to pollution of the world. The use of renewable energy resources and the creation of more efficient energy systems make great contributions to the prevention of greenhouse ... -
A decision support system to improve medical diagnosis using a combination of k-medoids clustering based attribute weighting and SVM
(Springer, 2016)The use of machine learning tools has become widespread in medical diagnosis. The main reason for this is the effective results obtained from classification and diagnosis systems developed to help medical professionals in ... -
Improvement potential of a real geothermal power plant using advanced exergy analysis
(Pergamon-Elsevier Science Ltd, 2016)The main purpose of this paper is to quantitatively evaluate thermodynamic performance of a geothermal power plant (GPP) from potential for improvement point of view. Thus, sources of inefficiency and irreversibilities can ... -
Effects of pulsed vacuum osmotic dehydration (PVOD) on drying kinetics of figs (Ficus carica L)
(Elsevier Sci Ltd, 2016)Drying kinetics of non-pretreated (fresh) and pretreated Sardop (Ficus carica L.) variety figs were compared. In experiments, figs were performed as a whole (unsliced and unpeeled). Pretreatment was pulsed vacuum osmotic ... -
THE IMPACT OF CHANGING ENERGY MIX OF TURKEY ON CO2 EMISSION INTENSITIES
(Technical Univ Wroclaw, 2016)A decomposition analysis of energy-related carbon dioxide emission intensities in Turkey from 1971 to 2010 has been presented. The refined Laspeyres method is used in the calculation to identify fossil fuel carbon effect, ... -
A Novel Approach to Determine Software Security Level using Bayes Classifier via Static Code Metrics
(Kaunas Univ Technology, 2016)Technological developments are increasing day by day and software products are growing in an uncontrolled way. This leads to the development of applications which do not comply with principles of design. Software which has ... -
ELASTIC-PLASTIC THERMAL AND RESIDUAL STRESS ANALYSIS OF ADHESIVELY BONDED SINGLE LAP JOINT
(Adcotec Ltd, 2016)In this work, an elastic-plastic thermal and residual stress analysis were performed for adhesively bonded single lap joint. For this purpose, thermoplastic composite adherents were bonded to each other with epoxy adhesive. ... -
Remote Control-Based Energy Management for Energy Savings in a Central Heating System
(Wiley, 2017)In this study, to enhance the performance of a central heating system, the following tasks were performed on the system via Radio Frequency modems: collection of data, evaluation of the system, real time monitoring, remote ...