Ara
Toplam kayıt 19, listelenen: 1-10
Bending moment capacity of rectangular mortise and tenon furniture joints
(Forest Products Soc, 2005)
This study investigated the effects of wood species, adhesive type, rail width, tenon depth, and tenon length oil bending strength and flexibility of mortise and tenon T-type end to side grain joints. Sugar maple, red oak, ...
Effect of shoulders on bending moment capacity of round mortise and tenon joints
(Forest Products Soc, 2006)
Tests were conducted to determine the effect of close-fitting shoulders on the bending moment capacity of round mortise and tenon joints. Results indicate that close-fitting shoulders can substantially increase the strength ...
Montaja hazır koltuk iskeletlerinin mukavemetinin sonlu elemanlar analizi ile belirlenmesi
(2007)
Bu çalışmada, ağaç ve ağaç esaslı (kompozit) malzemelerden tutkalsız-vidalı (demonte) olarak üretilmiş koltuk iskeletlerinin mukavemet özellikleri araştırılmıştır. Ayrıca, koltuk yan düzlem çerçevesinde, ara kayıtın yeri ...
Ahşap malzemede zarar yapan Hylotrupes bajulus (L.) ve Trichoferus griseus (F.) (Coleoptera: Cerambycidae) türlerinin ahşabın bazı fiziksel ve mekanik özelliklerine etkileri üzerinde araştırmalar
(2006)
Bu çalışma 2003–2005 yılları arasında doğa ve laboratuvar koşullarında gerçekleştirilmiştir. Ekonomik anlamda ahşap konstrüksiyonlarda en çok kullanılan, böcekler tarafından zarara uğratılmış ve böcek zararına uğramamış ...
Shear force and bending moment capacities of joints constructed with glued corner blocks
(Forest Products Soc, 2006)
Tests were carried out to determine the ultimate shear and bending moment capacities of glued corner blocks under controlled laboratory conditions. Yellow-poplar and sweetgum were utilized in constructing the joint specimens, ...
Staple holding strength of furniture frame joints constructed of plywood and oriented strandboard
(Forest Products Soc, 2003)
Staples are common in the construction of upholstered furniture. Staples are most common for the attachment of fabric to the frame, but they are also now being used in the construction of the frame itself because they ...
School chairs for developing countries: Designing for strength and durability, simplicity, and ease of construction
(Forest Products Soc, 2003)
Persistent shortages of school furniture pose serious educational problems in underdeveloped and developing countries. Research has shown that strong durable school furniture can be produced with simple tools and production ...
Design and construction of school work tables for developing countries
(Forest Products Soc, 2009)
Cyclic tests were conducted to determine the strength and durability of two types of school work tables designed for use in developing countries which were constructed with round mortise and tenon joints. The frames were ...
Theoretical analysis and design of joints in a representative sofa frame constructed of plywood and oriented strandboard
(Forest Products Soc, 2008)
Increasingly, plywood and oriented strandboard (OSB) are being used in the construction of upholstered furniture frames. There is little information available, however, concerning the strength of frames constructed with ...
Estimation equations for moment resistances of L-type screw corner joints in case goods furniture
(Forest Products Soc, 2008)
The effects of the number of screws and screw sizes on bending moment resistance of L-type furniture corner joints constructed of particleboard (PB) and medium density fiberboard (MDF) with resin Surfacing were investigated ...