Ara
Toplam kayıt 10, listelenen: 1-10
Nb-Pd-Ti BCC thin films for hydrogen separation
(Elsevier Science Sa, 2019)
An investigation was carried out into Nb-Pd-Ti ternary system to determine possible body-centered cubic (b.c.c.) membranes that can be used for hydrogen separation. A library of thin films was produced covering the greater ...
Segregation Resistant Nanocrystalline/Amorphous (La, Sr) CoO3-(La,Sr)(2)CoO4 Composite Cathodes for IT-SOFCs
(Electrochemical Soc Inc, 2019)
There is a considerable interest in lowering the operating temperature of solid oxide fuel cells. In this respect, (La,Sr)CoO3(La,Sr)(2)CoO4 dual phase oxides have attracted much attention as cathode materials due to their ...
Processing optimization of SiO2-capped aluminum-doped ZnO thin films for transparent heater and near-infrared reflecting applications
(Springer, 2021)
In this study, a series of optimization steps were performed in the production of Al-doped ZnO (AZO) thin films to tailor their properties as efficient transparent heaters and for near-infrared (NIR) reflectance. The films ...
Effect of crystal orientation on the segregation of aliovalent dopants at the surface of La0.6Sr0.4CoO3
(Royal Soc Chemistry, 2018)
The effect of crystal orientation on aliovalent dopant segregation at the surface of La0.6Sr0.4CoO3 as a model perovskite oxide was investigated. La0.6Sr0.4CoO3 pellets were produced and then annealed in air at 800 degrees ...
Fabrication of BaZr0.80Y0.20O3-delta Sputtering Target for Thin-Film Proton Conducting Oxides
(MAIK NAUKA/INTERPERIODICA/SPRINGER, 2022)
A systematic work was carried out to fabricate a phase-pure sputter target for thin film deposition of BaZr0.80Y0.20O3 - delta. The current study mainly involves two parts; i.e. determination of the ideal parameters for ...
Production and Characterization of Sputtered Y-doped BaZrO3 for Proton Conducting Oxides
(Springer, 2022)
A comprehensive study was carried out to evaluate single-phase BaZr0.80Y0.20O3-delta thin films produced by RF magnetron sputtering using a single target material. The present study mainly involved three objectives, i.e., ...
Nanoporous surface modification of 316L support materials by electrochemical dealloying
(INDERSCIENCE ENTERPRISES LTD, 2022)
The current study involves electroplating and dealloying processes applied sequentially to form a nanoporous Ni layer on 316L support material to produce a suitable substrate that enables thin film (< 1 mu m) deposition. ...
A dual-doping strategy of LaCoO3 for optimized oxygen evolution reaction toward zinc-air batteries application
(WILEY, 2022)
Perovskite-based electrocatalysts are extensively investigated as a replacement for noble metals electrocatalysts for energy storage and conversion devices. Their interesting catalytic activity, low cost, and diversity are ...
Development of BaZr0.80Y0.20O3 and SrCe0.95Yb0.05O3 Heterostructures for Proton-conducting Oxides
(WILEY, 2022)
An investigation was carried out on BaZr0.80Y0.20O3 (BZY) and SrCe0.95Yb0.05O3 (SCY) heterostructures for proton-conducting oxides. The heterostructures were produced by a combinatorial approach yielding 27 different phase ...
DEVELOPMENT OF HYDROGEN PURIFICATION MEMBRANE BASED ON Pd-Mn-Ag TERNARY SYSTEM
(International Association for Hydrogen Energy, IAHE, 2022)
In this paper, we investigate Pd-Mn-Ag ternary system for potential alloys as separation membranes. For this purpose, thin film membranes of varying compositions were produced via magnetron sputtering. These were evaluated ...