Basit öğe kaydını göster

dc.contributor.authorTürkoğlu, Türkay
dc.contributor.authorBaysal, Ergün
dc.contributor.authorKüreli, İhsan
dc.contributor.authorToker, Hilmi
dc.contributor.authorErgun, Mehmet Emin
dc.date.accessioned2020-11-20T16:17:42Z
dc.date.available2020-11-20T16:17:42Z
dc.date.issued2015
dc.identifier.issn1336-4561
dc.identifier.urihttps://hdl.handle.net/20.500.12809/3325
dc.descriptionWOS: 000364801500015en_US
dc.description.abstractThe purpose of this study was to investigate the changes caused by natural weathering on surface hardness and gloss of Scots pine (Pinus sylvestris L.) and Oriental beech (Fagus orientalis L.) wood specimens impregnated with three different chemicals and coated with two types varnish. In this study, tanalith-E (TN-E), adolit-KD 5 (AD-KD 5), and chromated copper arsenate (CCA) were used as wood preservatives and then polyurethane (PV) and synthetic (SV) varnishes were applied to the wood surface. The surface hardness and gloss of wood specimens were determined after 3 and 6 months of natural weathering. After 3 months of natural weathering, results showed that while surface hardness values of solely varnish coated, and both impregnated and varnish coated wood specimens increased, surface hardness of untreated (control) specimens decreased. However, surface hardness values of untreated (control), and impregnated and coated wood specimens decreased considerably after 6 months of natural weathering. The gloss values of impregnated and coated, and untreated (control) wood specimens after 3 months of natural weathering were slightly low, and after 6 months of natural weathering, the decrease reached to the considerable level. After six months of natural weathering, the surface hardness and gloss loss of Scots pine and Oriental beech was the lowest in the TN-E impregnated and PV coated wood specimens.en_US
dc.item-language.isoengen_US
dc.publisherSlovak Forest Products Research Insten_US
dc.item-rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectNatural Weatheringen_US
dc.subjectSurface Hardnessen_US
dc.subjectGlossen_US
dc.subjectScots Pineen_US
dc.subjectOriental Beechen_US
dc.subjectImpregnationen_US
dc.subjectVarnishen_US
dc.titleTHE EFFECTS OF NATURAL WEATHERING ON HARDNESS AND GLOSS OF IMPREGNATED AND VARNISHED SCOTS PINE AND ORIENTAL BEECH WOODen_US
dc.item-typearticleen_US
dc.contributor.departmentMÜ, Köyceğiz Meslek Yüksekokulu, Ormancılık Bölümüen_US
dc.contributor.authorID0000-0003-2011-0410
dc.contributor.institutionauthorTürkoğlu, Türkay
dc.contributor.institutionauthorBaysal, Ergün
dc.contributor.institutionauthorToker, Hilmi
dc.contributor.institutionauthorErgun, Mehmet Emin
dc.identifier.volume60en_US
dc.identifier.issue5en_US
dc.identifier.startpage833en_US
dc.identifier.endpage844en_US
dc.relation.journalWood Researchen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US


Bu öğenin dosyaları:

Thumbnail

Bu öğe aşağıdaki koleksiyon(lar)da görünmektedir.

Basit öğe kaydını göster