Güncel Gönderiler: Teknoloji Fakültesi
Toplam kayıt 288, listelenen: 161-180
-
Determination of the color stability of an environmentally friendly wood stain derived from laurel (Laurus nobilis L.) leaf extracts under UV exposure
(Forest Products Soc, 2008)This study was designed to develop an environmentally friendly wood stain derived from laurel (Laurus nobilis L.) and determine the color stability of this stain when exposed to UV light irradiation. Wood stains derived ... -
Design of a direct sliding gearless electrical motor for an ergonomic electrical wheelchair
(Kaunas Univ Technology, 2008)The use of the electrical wheelchairs designed for the disabled people should be easy and flexible. A brushless DC motor with a permanent magnet that can operate without gears was designed to be used in an ergonomic ... -
Sizing of electrical motors for gearless and directly stimulating applications
(Kaunas Univ Technology, 2008)Electrical machines are usually designed and produced to work at high circulation. The machines that are designed to work at high circulation are used along with reductors to be operated at low speed mechanisms to acquire ... -
Effect of the number of screws and screw size on moment capacity of furniture corner joints in case construction
(Forest Products Soc, 2008)Tests were carried out in order to determine the bending moment capacity of L-type glued-screwed coner joints constructed with multiple screws. 6 sizes of screws were used for assembling the specimens. 2, 3, and 4 screws ... -
Theoretical analysis and design of joints in a representative sofa frame constructed of plywood and oriented strandboard
(Forest Products Soc, 2008)Increasingly, plywood and oriented strandboard (OSB) are being used in the construction of upholstered furniture frames. There is little information available, however, concerning the strength of frames constructed with ... -
Estimation equations for moment resistances of L-type screw corner joints in case goods furniture
(Forest Products Soc, 2008)The effects of the number of screws and screw sizes on bending moment resistance of L-type furniture corner joints constructed of particleboard (PB) and medium density fiberboard (MDF) with resin Surfacing were investigated ... -
Determination of the color stability of an environmetally-frienlywood stain from saffron (CROCUS SATIVUS L.) extrakts under uv exposure
(Slovak Forest Products Research Inst, 2009)This study was designed to develop an environmentally friendly wood stain by natural pigments from saffron (Crocus sativus L.) and determine the color stability of this stain to UV light irradiation. Wood stains derived ... -
Design and construction of school work tables for developing countries
(Forest Products Soc, 2009)Cyclic tests were conducted to determine the strength and durability of two types of school work tables designed for use in developing countries which were constructed with round mortise and tenon joints. The frames were ... -
Performance Comparision of Internal and External Rotor Structured Wind Generators Mounted from Same Permanent Magnets on Same Geometry
(Kaunas Univ Technology, 2009)In this study, internal and external rotor radial-flux machine constructions built With surface mounted by applying the same NdFeB were compared according to torque density, vigorous material weight, outer radius, total ... -
Investigation of the Effects of Rotor Pole Geometry and Permanent Magnet to Line Start Permanent Magnet Synchronous Motor's Efficiency
(Kaunas Univ Technology, 2009)The effects of rotor pole geometry to line start permanent magnet synchronous motor's efficiency are discussed. To achieve this goal, several LSPMSMs which have eight type rotors and 550 Watts power have been simulated and ... -
Comparison of mechanical properties of solid wood and laminated veneer lumber fabricated from Turkish beech, Scotch pine, and Lombardy poplar
(Forest Products Soc, 2009)Selected mechanical properties of laminated veneer lumber (LVL) prepared from Turkish beech (Fagus orientalis L.), Scotch pine (Pinus sylvestris L.), and Lombardy poplar (Populus nigra) veneers bonded with polyvinyl acetate ... -
Some combustion parameters of wood impregnated with borates
(Forest Products Soc, 2009)This study was conducted to determine some of the combustion parameters of Calabrian pine and Oriental beech treated with borates. Average mass loss and temperature values of Calabrian pine and Oriental beech wood were ... -
Surface characteristics of wood pre-impregnated with borates before varnish coating
(Forest Products Soc, 2009)Some surface characteristics of Calabrian pine (Pinus brutia Ten) pre-impregnated with borates before varnish coating were studied. Boric acid, borax, and sodium perborate were used as borates. An alkyd-based synthetic ... -
Educational and consciousness-raising movements for renewable energy in Turkey
(Sila Science, 2009)Turkey has some difficulties in meeting its energy need due to rapid industrialization and population growth. It is necessary to educate and raise the consciousness level of the future generations to use the renewable ... -
A Case Study of Getting Performance Characteristics of a Salient Pole Synchronous Hydrogenerators
(Kaunas Univ Technology, 2010)L Topaloglu, C. Ocak, L Tarimer. A Case Study of Getting Performance Characteristics of a Salient Pole Synchronous Hydrogenerators // Electronics and Electrical Engineering. - Kaunas: Technologija, 2010. - No. 1(97). - P. ... -
Effects of the Traditional Turkish Art of Marbling (Ebru) Techniques on the Adhesion, Hardness, and Gloss of Some Finishing Varnishes
(Forest Products Soc, 2010)The aim of this study was to determine the effects of ebru, a traditional Turkish art of marbling, on some physical properties of various varnishes. Scots pine (Pinus sylvestris L.), Turkish oriental beech (Fagus orientalis ... -
Designing of a Permanent Magnet and Directly Driven Synchronous Generator for Low Speed Turbines
(Kaunas Univ Technology, 2011)In this study, a radial flux generator which is driven directly for low speed turbines and structured by permanent magnets has been designed and analyzed by finite elements methods. The designed generator model has got the ... -
Ultimate Failure Load and Stiffness of Screw Jointed Furniture Cabinets Constructed of Particleboard and Medium-Density Fiberboard
(Forest Products Soc, 2011)The objective of this study was to investigate the effects of material type, screw diameter, and screw length on ultimate failure load and stiffness of four-sided furniture cabinets. In total, 81 four-sided test cabinets ... -
Sipping tests for the irradiated fuel elements of the TR-2 research reactor
(Carl Hanser Verlag, 2011)Sipping tests have been performed for fuel elements of the TR-2 reactor at Cekmece Nuclear Research and Training Center (CNRTC), in order to find out which one failed in the core. A sipping assembly has been constructed ... -
A Case Study to Risk Assessment for Protecting Airports against Lightening
(Kaunas Univ Technology, 2012)I. Tarimer, B. Kuca, T. Kisielewicz. A Case Study to Risk Assessment for Protecting Airports against Lightening // Electronics and Electrical Engineering. - Kaunas: Technologija, 2012. - No. 1(117). - P. 49-52. An airport ...
