Basit öğe kaydını göster

dc.contributor.authorKasal, A.
dc.date.accessioned2020-11-20T16:45:46Z
dc.date.available2020-11-20T16:45:46Z
dc.date.issued2008
dc.identifier.issn1300-1884
dc.identifier.urihttps://hdl.handle.net/20.500.12809/5518
dc.description.abstractIn this study, effects of the corner block dimensions on moment and shear force capacities for T-type glued doweled furniture joints were investigated. Specimens were prepared of Turkish beech (Fagus orientalis Lipsky) and Scotch pine (Pinus sylvestris L.) woods. The specimens jointed with beech dowels and polyvinylacetate (PVAc) adhesive were reinforced by the corner blocks measuring of 30×30×25 mm, 40×40×25 mm, 50×50×25 mm ve 60×60×25 mm. A total of 200 specimens included 2 test types, 2 wood species, 4 corner block dimensions, control specimens, and 10 replications for each were prepared and tested under static bending and shear loads, thus the moment and shear force bearing performances were determined. Furthermore, the mathematical models were developed by analyzing the relations between the corner block dimensions and moment and shear performances. Therefore, furniture designers could estimate the moments and shear forces for each wood species as a function of corner block dimension by utilizing these predictive expressions. At the end of the tests, the specimens prepared of beech and reinforced with 60×60×25 mm corner blocks gave the highest values for both moment and shear performances.en_US
dc.item-language.isoturen_US
dc.item-rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectCorner Blocken_US
dc.subjectDowel Jointen_US
dc.subjectMoment Capacityen_US
dc.subjectScotch Pineen_US
dc.subjectShear Force Capacityen_US
dc.subjectTurkish Beechen_US
dc.titleFarkli ölçülerde köşe destek elemani kullanilmiş t-ti?pi? kavelali mobi?lya bi?rleş ti?rmeleri?ni?n moment ve kesme kuvveti? ta?ima kapasi?teleri?en_US
dc.item-title.alternativeBending moment and shear force capacities of the t-type doweled furniture joints reinforced with different sizes of corner blocks [Farkli ölçülerde köşe destek elemani kullanilmiş t-ti?pi? kavelali mobi?lya bi?rleş ti?rmeleri?ni?n moment ve kesme kuvveti? ta?ima kapasi?teleri?]en_US
dc.item-typearticleen_US
dc.contributor.departmenten_US
dc.contributor.departmentTempKasal, A., Mobilya ve Dekorasyon Eğitimi Bölümü, Teknik Eğitim Fakültesi, Muğla Üniversitesi, 48000, Kötekli, Muğla, Turkeyen_US
dc.identifier.volume23en_US
dc.identifier.issue2en_US
dc.identifier.startpage273en_US
dc.identifier.endpage282en_US
dc.relation.journalJournal of the Faculty of Engineering and Architecture of Gazi Universityen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US


Bu öğenin dosyaları:

DosyalarBoyutBiçimGöster

Bu öğe ile ilişkili dosya yok.

Bu öğe aşağıdaki koleksiyon(lar)da görünmektedir.

Basit öğe kaydını göster