Basit öğe kaydını göster

Preparation of melt derived 45S5 bioactive glass from rice hull ash and its characterization

dc.contributor.authorYucel, S.
dc.contributor.authorÖzçimen, D.
dc.contributor.authorTerzi?glu, P.
dc.contributor.authorAcar, S.
dc.contributor.authorYaman, C.
dc.date.accessioned2020-11-20T16:49:21Z
dc.date.available2020-11-20T16:49:21Z
dc.date.issued2013
dc.identifier.issn1936-6612
dc.identifier.urihttps://doi.org/10.1166/asl.2013.5228
dc.identifier.urihttps://hdl.handle.net/20.500.12809/6130
dc.description.abstract45S5 bioactive glass with chemical composition of 45 SiO2-24.5 Na2O-24.5 CaO-6 P2O5 (wt%) was synthesized through melting process using alkali extracted silica from rice hull ash, and commercial silica. Prepared bioactive glasses were characterized by incubation in simulated body fluid (SBF) to investigate their bioactivities and degradation. Scanning electron microscope (SEM), Fourier transform infrared spectroscopy (FTIR), XRD and Vickers hardness measurements were obtained for all samples before and after incubation in simulated body fluid. The results showed that 45S5 bioactive glass produced with amorphous rice hull silica has a good bioactivity, so it can be used as an alternative to commercial silica for the production of the 45S5 bioglass. © 2013 American Scientific Publishers.en_US
dc.item-language.isoengen_US
dc.item-rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subject45S5en_US
dc.subjectAmorphous silicaen_US
dc.subjectBioactive glassen_US
dc.subjectBioactivityen_US
dc.subjectRice hull ashen_US
dc.titlePreparation of melt derived 45S5 bioactive glass from rice hull ash and its characterizationen_US
dc.item-typearticleen_US
dc.contributor.departmentMÜen_US
dc.contributor.departmentTempYucel, S., Bioengineering Department, Yildiz Technical University, Davutpasa Campus 34220 Esenler, Istanbul, Turkey; Özçimen, D., Bioengineering Department, Yildiz Technical University, Davutpasa Campus 34220 Esenler, Istanbul, Turkey; Terzi?glu, P., Chemistry Department, Muğla University, Kötekli Campus, Muğla, Turkey; Acar, S., Bioengineering Department, Yildiz Technical University, Davutpasa Campus 34220 Esenler, Istanbul, Turkey; Yaman, C., Bioengineering Department, Yildiz Technical University, Davutpasa Campus 34220 Esenler, Istanbul, Turkeyen_US
dc.identifier.doi10.1166/asl.2013.5228
dc.identifier.volume19en_US
dc.identifier.issue12en_US
dc.identifier.startpage3477en_US
dc.identifier.endpage3481en_US
dc.relation.journalAdvanced Science Lettersen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US


Bu öğenin dosyaları:

DosyalarBoyutBiçimGöster

Bu öğe ile ilişkili dosya yok.

Bu öğe aşağıdaki koleksiyon(lar)da görünmektedir.

Basit öğe kaydını göster