Basit öğe kaydını göster

dc.contributor.authorKart, Şaban
dc.contributor.authorBaysal, Ergün
dc.contributor.authorKüçüktüvek, Mustafa
dc.contributor.authorTürkoğlu, Türkay
dc.contributor.authorToker, Hilmi
dc.contributor.authorAltay, Çağlar
dc.contributor.authorPeker, Hüseyin
dc.date.accessioned2020-11-20T14:43:48Z
dc.date.available2020-11-20T14:43:48Z
dc.date.issued2019
dc.identifier.issn1336-4561
dc.identifier.urihttps://hdl.handle.net/20.500.12809/1230
dc.descriptionWOS: 000460515100004en_US
dc.description.abstractThis study was designed to investigate some surface characteristics such as glossiness and surface roughness changes of varnished thermowood after six months of weathering. Thermal modification of Scots pine (Pinus sylvestris L.) and Oriental beech (Fagus orientalis L.) wood were carried out by hot air in an oven for 1, 2, and 3 hours at 205, 215, and 225 degrees C. After the modification process, wood specimens were varnished using a polyurethane varnish (PV) and cellulosic varnish (CV). The natural weathering process caused an increase in the surface roughness of the test specimens according to the test results. The Scots pine and Oriental beech test specimens which were heat treated and varnished gave more favorable results compared to only varnish test specimens after natural weathering in terms of surface characteristics such as surface roughness and glossiness. Generally, as the heat treatment time and temperature increase, it is observed that the surface characteristics of the Scots pine and Oriental beech wood specimens improve positively. According to the results of the tests, the samples varnished with polyurethane varnish gave better results in terms of surface roughness at the end of the natural weathering process, whereas the samples varnished with cellulosic varnish gave better results in terms of glossiness values.en_US
dc.item-language.isoengen_US
dc.publisherSlovak Forest Products Research Insten_US
dc.item-rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectScots Pineen_US
dc.subjectOriental Beechen_US
dc.subjectThermal Modificationen_US
dc.subjectVarnishen_US
dc.subjectGlossinessen_US
dc.subjectSurface Roughnessen_US
dc.subjectWeatheringen_US
dc.titleSOME SURFACE CHARACTERISTICS OF VARNISHED THERMOWOOD AFTER WEATHERINGen_US
dc.item-typearticleen_US
dc.contributor.departmentMÜ, Teknoloji Fakültesi, Ağaç İşleri Endüstri Mühendisliği Bölümüen_US
dc.contributor.institutionauthorKart, Şaban
dc.contributor.institutionauthorBaysal, Ergün
dc.contributor.institutionauthorToker, Hilmi
dc.identifier.volume64en_US
dc.identifier.issue1en_US
dc.identifier.startpage35en_US
dc.identifier.endpage48en_US
dc.relation.journalWood Researchen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US


Bu öğenin dosyaları:

Thumbnail

Bu öğe aşağıdaki koleksiyon(lar)da görünmektedir.

Basit öğe kaydını göster