Kategori "Makale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı" Ağaç İşleri Endüstri Mühendisliği Bölümü Koleksiyonu İçin Listeleme
Toplam kayıt 87, listelenen: 21-40
-
Determination of the strength performance of chair frames constructed of solid wood and wood composites
(Forest Products Soc, 2006)In this study, the strength properties of glued-doweled and screw jointed chair frames constructed of solid wood and wood-based (composite) materials were investigated. Scotch pine (Pinus Syivestris Lipsky) and Turkish ... -
Determination of wood characteristics of Pinus brutia Ten. infested with Marchalina hellenica Genn.
(Taylor and Francis Ltd., 2022)The aim of this study was to examine the chemical, anatomical, physical, and mechanical properties of Marchalina hellenica Genn.-infested Pinus brutia Ten. wood. Studies were carried out on wood samples taken from uninfested ... -
Dimensional stabilization of wood treated with furfuryl alcohol catalysed by borates
(Springer, 2004)Furfuryl alcohol has a sufficiently small molecular size, which allows impregnation into wood and can be polymerized in the cell walls. Polymerization can be accomplished using a catalyst, heat or penetrating radiation. ... -
Effect of hole diameter, hole distance from the edge, and material properties on lateral pin holding strength of medium density fiberboard and particleboard
(Forest Products Soc, 2004)There is no established standard which evaluates the lateral holding resistance of wood composites. The method of test offered in this study intends to determine the lateral resistance of panels used in case constructions ... -
Effect of shoulders on bending moment capacity of round mortise and tenon joints
(Forest Products Soc, 2006)Tests were conducted to determine the effect of close-fitting shoulders on the bending moment capacity of round mortise and tenon joints. Results indicate that close-fitting shoulders can substantially increase the strength ... -
Effect of the number of screws and screw size on moment capacity of furniture corner joints in case construction
(Forest Products Soc, 2008)Tests were carried out in order to determine the bending moment capacity of L-type glued-screwed coner joints constructed with multiple screws. 6 sizes of screws were used for assembling the specimens. 2, 3, and 4 screws ... -
Effects of cross-sectional shape on the bending strength in furniture joints
(Kastamonu Univ, Orman Fak, 2018)Aim of the study: Tests were carried out to evaluate the ultimate bending strength of the circular and square cross sectioned furniture joint members and find out whether the form factor is applicable to the small specimens ... -
EFFECTS OF MICROCRYSTALLINE CELLULOSE ON SOME PERFORMANCE PROPERTIES OF CHITOSAN AEROGELS
(Universidad del Bio-Bio, 2021)The aim of this research was to investigate the effect of the microcrystalline cellulose reinforcement on some physical, mechanical, thermal, and morphological properties of the chitosan aerogels. The bio-based chitosan ... -
EFFECTS OF NATURAL WEATHERING ON SURFACE CHARACTERISTICS OF SCOTS PINE IMPREGNATED WITH WOLMANIT CX-8 AND VARNISHED
(Slovak Forest Products Research Inst, 2020)In this study, it was aimed to investigate the effects of weathering on some surface characteristics such as color and surface roughness changes of Scots pine impregnated with copper-containing chemical such as Wolmanit ... -
Energy Efficiency in Lumber Drying - Sample of Drying Red Pine (Pinus brutia) Using Solar Energy
(Gazi Univ, 2020)Energy supply and cost come to the forefront more with each passing day. However, the impacts on the environment in the production and consumption have become important as cost and supply. Therefore, wind, solar, wave etc. ... -
Estimation equations for moment resistances of L-type screw corner joints in case goods furniture
(Forest Products Soc, 2008)The effects of the number of screws and screw sizes on bending moment resistance of L-type furniture corner joints constructed of particleboard (PB) and medium density fiberboard (MDF) with resin Surfacing were investigated ... -
Experimental and numerical analysis of mounting force of auxetic dowels for furniture joints
(Elsevier Ltd, 2021)Limited number of papers describe the practical use of auxetics in the wood and furniture sector. Only one paper describes the auxetic nails. None of them analyzed the impact of using auxetics on the strength of furniture ... -
Exploratory study of small timber trusses constructed with through-bolt and cross-pipe heel connectors
(Forest Products Soc, 2007)Throughout the world, there is a need for simple, strong, yet inexpensive connectors that can be used to fabricate trusses from natural small-diameter tree stems as well as squared stems without extensive premachining of ... -
FIRE RESISTANCE PERFORMANCE OF WOOD MATERIALS COLORED WITH ECO-FRIENDLY POMEGRANATE SKIN (PUNICA GRANATUM) EXTRACTS
(Slovak Forest Products Research Inst, 2016)The main goal of this study was to determine fire resistance properties of wood treated with pomegranate extract and mordant mixes. According to that wood materials Scotch pine (Pinus sylvestris L.), Oriental beech (Fagus ... -
IImpact of uv irradiance on selected parameters of scots pine impregnated with some commonly used fire- retardants
(Slovak Forest Products Research Inst, 2019)This study was designed to determine some selected parameters such as gloss, surface roughness, and color changes of Scots pine wood impregnated with commonly used fire-retardant (FR) chemicals after UV irradiance. Sodium ... -
Improvement of technological properties of wood plastic composites reinforced with glass and carbon fibre fabric
(SAGE Publications Ltd, 2021)In this study, HDPE-based flat-pressed WPCs were reinforced with glass fibre and carbon fibre woven fabrics, which could be used where high strength and stiffness are required. The effect of reinforcement on some physical, ... -
IMPROVING MECHANICAL AND PHYSICAL PROPERTIES OF PARTICLEBOARD MADE FROM VINE (VITIS VINIFERA L.) PRUNINGS BY ADDITION REINFORCEMENT MATERIALS
(Slovak Forest Products Research Inst, 2016)The main goal of this study was to improve mechanical and physical properties of particleboards made from vine (Vitis vinjfera L.) prunings by addition of reinforcement materials. In Turkey, there are 462.000 hectare areas ... -
Improving Weathering Performance of Wood by Borates Impregnation and Liquid Glass Coating
(Zagreb Univ, Fac Forestry, 2020)Weathering performance of impregnated and coated wood products is an important issue that influences their appearance as well as their service life after outdoor or indoor exposure. A novel procedure to improve the weathering ... -
Increasing the physical and combustion performance of Oriental beech by impregnating borates and coating liquid glass
(ASSOC BRASIL POLIMEROS, 2021)This study was designed to investigate physical properties such as color changes after weathering and water absorption (WA) levels, and combustion performance of borates-impregnated and LG-coated Oriental beech wood. Results ... -
An investigation of some physical and mechanical properties of laminated veneer lumber manufactured from black alder (Alnus glutinosa) glued with polyvinyl acetate and polyurethane adhesives
(Forest Products Soc, 2006)This study was designed to determine some physical and mechanical properties of laminated veneer lumber (LVL) made of black alder (Alnus glutinosa). Veneers were prepared from 2-mm and 4-mm-thick black alder and glued using ...