Başlık için Ağaç İşleri Endüstri Mühendisliği Bölümü Koleksiyonu listeleme
Toplam kayıt 109, listelenen: 30-49
-
Determination of the color stability of an environmentally friendly wood stain derived from laurel (Laurus nobilis L.) leaf extracts under UV exposure
(Forest Products Soc, 2008)This study was designed to develop an environmentally friendly wood stain derived from laurel (Laurus nobilis L.) and determine the color stability of this stain when exposed to UV light irradiation. Wood stains derived ... -
Determination of the color stability of an environmetally-frienlywood stain from saffron (CROCUS SATIVUS L.) extrakts under uv exposure
(Slovak Forest Products Research Inst, 2009)This study was designed to develop an environmentally friendly wood stain by natural pigments from saffron (Crocus sativus L.) and determine the color stability of this stain to UV light irradiation. Wood stains derived ... -
Determination of the Strength of Various Sofa Frames with Finite Element Analysis
(Gazi Univ, 2006)In this study, the strength properties of glued-dowel joined sofa frames constructed of solid wood and wood based composite materials were investigated. Furthermore, the place of the stretcher was optimized in the side ... -
Determination of the strength performance of chair frames constructed of solid wood and wood composites
(Forest Products Soc, 2006)In this study, the strength properties of glued-doweled and screw jointed chair frames constructed of solid wood and wood-based (composite) materials were investigated. Scotch pine (Pinus Syivestris Lipsky) and Turkish ... -
Determination of wood characteristics of Pinus brutia Ten. infested with Marchalina hellenica Genn.
(Taylor and Francis Ltd., 2022)The aim of this study was to examine the chemical, anatomical, physical, and mechanical properties of Marchalina hellenica Genn.-infested Pinus brutia Ten. wood. Studies were carried out on wood samples taken from uninfested ... -
Dimensional stabilization of wood treated with furfuryl alcohol catalysed by borates
(Springer, 2004)Furfuryl alcohol has a sufficiently small molecular size, which allows impregnation into wood and can be polymerized in the cell walls. Polymerization can be accomplished using a catalyst, heat or penetrating radiation. ... -
Effect of hole diameter, hole distance from the edge, and material properties on lateral pin holding strength of medium density fiberboard and particleboard
(Forest Products Soc, 2004)There is no established standard which evaluates the lateral holding resistance of wood composites. The method of test offered in this study intends to determine the lateral resistance of panels used in case constructions ... -
Effect of shoulders on bending moment capacity of round mortise and tenon joints
(Forest Products Soc, 2006)Tests were conducted to determine the effect of close-fitting shoulders on the bending moment capacity of round mortise and tenon joints. Results indicate that close-fitting shoulders can substantially increase the strength ... -
Effect of the number of screws and screw size on moment capacity of furniture corner joints in case construction
(Forest Products Soc, 2008)Tests were carried out in order to determine the bending moment capacity of L-type glued-screwed coner joints constructed with multiple screws. 6 sizes of screws were used for assembling the specimens. 2, 3, and 4 screws ... -
Effects of cross-sectional shape on the bending strength in furniture joints
(Kastamonu Univ, Orman Fak, 2018)Aim of the study: Tests were carried out to evaluate the ultimate bending strength of the circular and square cross sectioned furniture joint members and find out whether the form factor is applicable to the small specimens ... -
EFFECTS OF MICROCRYSTALLINE CELLULOSE ON SOME PERFORMANCE PROPERTIES OF CHITOSAN AEROGELS
(Universidad del Bio-Bio, 2021)The aim of this research was to investigate the effect of the microcrystalline cellulose reinforcement on some physical, mechanical, thermal, and morphological properties of the chitosan aerogels. The bio-based chitosan ... -
EFFECTS OF NATURAL WEATHERING ON SURFACE CHARACTERISTICS OF SCOTS PINE IMPREGNATED WITH WOLMANIT CX-8 AND VARNISHED
(Slovak Forest Products Research Inst, 2020)In this study, it was aimed to investigate the effects of weathering on some surface characteristics such as color and surface roughness changes of Scots pine impregnated with copper-containing chemical such as Wolmanit ... -
Effects of the Traditional Turkish Art of Marbling (Ebru) Techniques on the Adhesion, Hardness, and Gloss of Some Finishing Varnishes
(Forest Products Soc, 2010)The aim of this study was to determine the effects of ebru, a traditional Turkish art of marbling, on some physical properties of various varnishes. Scots pine (Pinus sylvestris L.), Turkish oriental beech (Fagus orientalis ... -
Energy Efficiency in Lumber Drying - Sample of Drying Red Pine (Pinus brutia) Using Solar Energy
(Gazi Univ, 2020)Energy supply and cost come to the forefront more with each passing day. However, the impacts on the environment in the production and consumption have become important as cost and supply. Therefore, wind, solar, wave etc. ... -
Estimation equations for moment resistances of L-type screw corner joints in case goods furniture
(Forest Products Soc, 2008)The effects of the number of screws and screw sizes on bending moment resistance of L-type furniture corner joints constructed of particleboard (PB) and medium density fiberboard (MDF) with resin Surfacing were investigated ... -
Experimental and numerical analysis of mounting force of auxetic dowels for furniture joints
(Elsevier Ltd, 2021)Limited number of papers describe the practical use of auxetics in the wood and furniture sector. Only one paper describes the auxetic nails. None of them analyzed the impact of using auxetics on the strength of furniture ... -
Exploratory study of small timber trusses constructed with through-bolt and cross-pipe heel connectors
(Forest Products Soc, 2007)Throughout the world, there is a need for simple, strong, yet inexpensive connectors that can be used to fabricate trusses from natural small-diameter tree stems as well as squared stems without extensive premachining of ... -
Farklı ölçülerde köşe destek elemanı kullanılmış T-tipi kavelalı mobilya birleştirmelerinin moment ve kesme kuvveti taşıma kapasiteleri
(2008)Bu çalışmada, T-tipi kavelalı tutkallı mobilya birleştirmelerinde, köşe destek elemanı boyutunun moment ve kesme kuvveti taşıma performansı üzerindeki etkileri incelenmiştir. Deney örnekleri, Doğu kayını (Fagus orientalis ... -
FIRE RESISTANCE PERFORMANCE OF WOOD MATERIALS COLORED WITH ECO-FRIENDLY POMEGRANATE SKIN (PUNICA GRANATUM) EXTRACTS
(Slovak Forest Products Research Inst, 2016)The main goal of this study was to determine fire resistance properties of wood treated with pomegranate extract and mordant mixes. According to that wood materials Scotch pine (Pinus sylvestris L.), Oriental beech (Fagus ... -
Fire-retardant bioproducts for green buildings
(WOODHEAD PUBL LTD, 2020)Green buildings are environmental-friendly designs that use site, energy, water, and all other resources efficiently. The increased awareness and related regulatory amendments produce an increase in green building activity. ...