Başlık için Ağaç İşleri Endüstri Mühendisliği Bölümü Koleksiyonu listeleme
Toplam kayıt 109, listelenen: 25-44
-
DECAY RESISTANCE, PHYSICAL, MECHANICAL, AND THERMAL PROPERTIES OF HEATED ORIENTAL BEECH WOOD
(Slovak Forest Products Research Inst, 2015)Heat treatment of Oriental beech (Fagus orientalis) wood was carried out by hot air in an oven for 2, 6, and 10 h at 125, 155, and 185 degrees C. After heat treatment; decay resistance, oven dry density, modulus of rupture ... -
Design and construction of school work tables for developing countries
(Forest Products Soc, 2009)Cyclic tests were conducted to determine the strength and durability of two types of school work tables designed for use in developing countries which were constructed with round mortise and tenon joints. The frames were ... -
Determination leaching of boron from Oriental beech wood coated with polyurethane/polyurea (PUU) hybrid and epoxy (EPR) resins
(Associacao Brasileira de Polimeros, 2022)In this study, the leaching performance of boron compounds from Oriental beech (Fagus orientalis L.) wood coated with polyurethane/polyurea (PUU) hybrid resin and epoxy resin (EPR) was investigated. Leaching of boron test ... -
DETERMINATION OF ANTIFUNGAL AND ANTIBACTERIAL ACTIVITIES OF NATURAL DYE OF POMEGRANATE SKIN (PUNICA GRANATUM L.) IMPLEMENTED ON WOODEN MATERIALS
(Slovak Forest Products Research Inst, 2016)The demand for partially harmless dyes produced from natural sources as an alternative to synthetic dyes has been increasing. Natural dyes environment and they are attractive materials contributing to the protection of ... -
DETERMINATION OF LEACHING FEATURES OF WOOD SURFACES COLORED BY ECO-FRIENDLY RED BEETROOT (BETA VULGARIS) EXTRACT
(Slovak Forest Products Research Inst, 2018)The aim of this study to develop an eco-friendly wood stain and to determine the adsorption and desorption on surfaces. In this context; plant dyestuff was extracted from the red beetroot by using ultrasonic assisted method ... -
Determination of the color stability of an environmentally friendly wood stain derived from laurel (Laurus nobilis L.) leaf extracts under UV exposure
(Forest Products Soc, 2008)This study was designed to develop an environmentally friendly wood stain derived from laurel (Laurus nobilis L.) and determine the color stability of this stain when exposed to UV light irradiation. Wood stains derived ... -
Determination of the color stability of an environmetally-frienlywood stain from saffron (CROCUS SATIVUS L.) extrakts under uv exposure
(Slovak Forest Products Research Inst, 2009)This study was designed to develop an environmentally friendly wood stain by natural pigments from saffron (Crocus sativus L.) and determine the color stability of this stain to UV light irradiation. Wood stains derived ... -
Determination of the Strength of Various Sofa Frames with Finite Element Analysis
(Gazi Univ, 2006)In this study, the strength properties of glued-dowel joined sofa frames constructed of solid wood and wood based composite materials were investigated. Furthermore, the place of the stretcher was optimized in the side ... -
Determination of the strength performance of chair frames constructed of solid wood and wood composites
(Forest Products Soc, 2006)In this study, the strength properties of glued-doweled and screw jointed chair frames constructed of solid wood and wood-based (composite) materials were investigated. Scotch pine (Pinus Syivestris Lipsky) and Turkish ... -
Determination of wood characteristics of Pinus brutia Ten. infested with Marchalina hellenica Genn.
(Taylor and Francis Ltd., 2022)The aim of this study was to examine the chemical, anatomical, physical, and mechanical properties of Marchalina hellenica Genn.-infested Pinus brutia Ten. wood. Studies were carried out on wood samples taken from uninfested ... -
Dimensional stabilization of wood treated with furfuryl alcohol catalysed by borates
(Springer, 2004)Furfuryl alcohol has a sufficiently small molecular size, which allows impregnation into wood and can be polymerized in the cell walls. Polymerization can be accomplished using a catalyst, heat or penetrating radiation. ... -
Effect of hole diameter, hole distance from the edge, and material properties on lateral pin holding strength of medium density fiberboard and particleboard
(Forest Products Soc, 2004)There is no established standard which evaluates the lateral holding resistance of wood composites. The method of test offered in this study intends to determine the lateral resistance of panels used in case constructions ... -
Effect of shoulders on bending moment capacity of round mortise and tenon joints
(Forest Products Soc, 2006)Tests were conducted to determine the effect of close-fitting shoulders on the bending moment capacity of round mortise and tenon joints. Results indicate that close-fitting shoulders can substantially increase the strength ... -
Effect of the number of screws and screw size on moment capacity of furniture corner joints in case construction
(Forest Products Soc, 2008)Tests were carried out in order to determine the bending moment capacity of L-type glued-screwed coner joints constructed with multiple screws. 6 sizes of screws were used for assembling the specimens. 2, 3, and 4 screws ... -
Effects of cross-sectional shape on the bending strength in furniture joints
(Kastamonu Univ, Orman Fak, 2018)Aim of the study: Tests were carried out to evaluate the ultimate bending strength of the circular and square cross sectioned furniture joint members and find out whether the form factor is applicable to the small specimens ... -
EFFECTS OF MICROCRYSTALLINE CELLULOSE ON SOME PERFORMANCE PROPERTIES OF CHITOSAN AEROGELS
(Universidad del Bio-Bio, 2021)The aim of this research was to investigate the effect of the microcrystalline cellulose reinforcement on some physical, mechanical, thermal, and morphological properties of the chitosan aerogels. The bio-based chitosan ... -
EFFECTS OF NATURAL WEATHERING ON SURFACE CHARACTERISTICS OF SCOTS PINE IMPREGNATED WITH WOLMANIT CX-8 AND VARNISHED
(Slovak Forest Products Research Inst, 2020)In this study, it was aimed to investigate the effects of weathering on some surface characteristics such as color and surface roughness changes of Scots pine impregnated with copper-containing chemical such as Wolmanit ... -
Effects of the Traditional Turkish Art of Marbling (Ebru) Techniques on the Adhesion, Hardness, and Gloss of Some Finishing Varnishes
(Forest Products Soc, 2010)The aim of this study was to determine the effects of ebru, a traditional Turkish art of marbling, on some physical properties of various varnishes. Scots pine (Pinus sylvestris L.), Turkish oriental beech (Fagus orientalis ... -
Energy Efficiency in Lumber Drying - Sample of Drying Red Pine (Pinus brutia) Using Solar Energy
(Gazi Univ, 2020)Energy supply and cost come to the forefront more with each passing day. However, the impacts on the environment in the production and consumption have become important as cost and supply. Therefore, wind, solar, wave etc. ... -
Estimation equations for moment resistances of L-type screw corner joints in case goods furniture
(Forest Products Soc, 2008)The effects of the number of screws and screw sizes on bending moment resistance of L-type furniture corner joints constructed of particleboard (PB) and medium density fiberboard (MDF) with resin Surfacing were investigated ...