Başlık için Ağaç İşleri Endüstri Mühendisliği Bölümü Koleksiyonu listeleme
Toplam kayıt 109, listelenen: 66-85
-
Natural Fiber Blend-Nylon 6 Composites
(Wiley-Blackwell, 2013)In this study, engineering thermoplastic composites were prepared from natural fiber blendfilled nylon 6. Natural fiber blend from a mixture of kenaf, flax, and hemp fibers were added to nylon 6 using melt mixing to produce ... -
A new boron impregnation technique of wood by vapor boron of boric acid to reduce leaching boron from wood
(Springer, 2005)This study was designed to reveal impregnation ability and to enhance leaching resistance of boron from borate-treated wood. Vapor boron treatment was applied in cornpressed and uncompressed states at high temperatures ... -
Numerical Analyses of Various Sizes of Mortise and Tenon Furniture Joints
(North Carolina State Univ Dept Wood & Paper Sci, 2016)This study reports the moment resistance, stiffness, and numerical analysis of various sizes of round-end mortise and tenon joints. L-shaped and T-shaped specimens were constructed. Joints were manufactured using three ... -
Optimization of the Cross-Sectional Geometry of Auxetic Dowels for Furniture Joints
(PMC, 2023)In this study, the aim was to optimize the cross-sectional geometry of auxetic dowels for furniture joints. For this purpose, two different sizes of auxetic dowels were chosen, one for frame- and the other for panel-type ... -
Potential of ultrasonic pulse velocity for evaluating the dimensional stability of oak and chestnut wood
(Elsevier, 2016)The objective of this study was to examine the potential of ultrasonic velocity as a rapid and nondestructive method to predict the dimensional stability of oak (Quercus petraea (Mattuschka) Lieblein) and chestnut (Castanea ... -
QUALIFICATIONS SOUGHT IN TECHNICAL EMPLOYEES BY SME BUSINESSES (FURNITURE INDUSTRY SAMPLE)
(Pressacademia, 2016)Nowadays, businesses are increasingly in need of employees who can adopt changing conditions in order to be able to enhance competitive capacity, who can understand technological applications and can use the same, who are ... -
RELATIONSHIP BETWEEN STATIC AND CYCLIC FRONT TO BACK LOAD CAPACITY OF WOODEN CHAIRS, AND EVALUATION OF THE STRENGTH VALUES ACCORDING TO ACCEPTABLE DESIGN VALUES
(Soc Wood Sci Technol, 2018)Tests were carried out to investigate the relationship between static and cyclic strength of wooden chairs. Furthermore, cyclic front to back load performance of chairs were compared with acceptable design loads that were ... -
RESEARCH ON THE USAGE OF ANTIFUNGAL AND ANTIBACTERIAL PROPERTIES OF INDIGO (INDIGOFERA TINCTORIA L.) COLORANT USED AS A WOOD PRESERVATIVE
(Slovak Forest Products Research Inst, 2015)In this study the antifungal and antimicrobial property of plant extracts from indigo was determined when used as a wood preservative. The extract was dissolved from Indigofera tinctoria L. by using an ultrasound assisted ... -
School chairs for developing countries: Designing for strength and durability, simplicity, and ease of construction
(Forest Products Soc, 2003)Persistent shortages of school furniture pose serious educational problems in underdeveloped and developing countries. Research has shown that strong durable school furniture can be produced with simple tools and production ... -
Shear force and bending moment capacities of joints constructed with glued corner blocks
(Forest Products Soc, 2006)Tests were carried out to determine the ultimate shear and bending moment capacities of glued corner blocks under controlled laboratory conditions. Yellow-poplar and sweetgum were utilized in constructing the joint specimens, ... -
Shear Force Capacities of H-Type Furniture Joints Constructed of Various Heat-Treated Wood Species
(ZAGREB UNIV, 2023)The aim of this study was to investigate the effect of wood species, heat treatment, adhesive type and joint technique on shear force capacity of H-type furniture joints. For this purpose, an experimental design that ... -
Some additional fields in this record are shown in regional languages from the following databases
(ASSOC BRASIL POLIMEROS, 2022)In this study, the leaching performance of boron compounds from Oriental beech (Fagus orientalis L.) wood coated with polyurethane/polyurea (PUU) hybrid resin and epoxy resin (EPR) was investigated. Leaching of boron test ... -
Some combustion parameters of wood impregnated with borates
(Forest Products Soc, 2009)This study was conducted to determine some of the combustion parameters of Calabrian pine and Oriental beech treated with borates. Average mass loss and temperature values of Calabrian pine and Oriental beech wood were ... -
Some mechanical properties of wood impregnated with environmentally- friendly boron and copper based chemicals
(Slovak Forest Products Research Inst, 2013)The aim of this study was made to determine some mechanical properties such as compression strength parallel to grain (CSPG), modulus of rupture (MOR), and modulus of elasticity (MOE) of wood treated with some boron and ... -
Some Physical and Mechanical Properties of Borate-Treated Oriental Beech Wood
(Zagreb Univ, Fac Forestry, 2015)This study was designed to determine some physical properties such as surface roughness and oven dry density, and some mechanical properties such as modulus of elasticity (MOE) of borate-treated wood specimens. Wood specimens ... -
SOME PHYSICAL CHARACTERISTICS OF THERMALLY MODIFIED ORIENTAL-BEECH WOOD
(Univ Bio-Bio, 2014)Heat treatment of Oriental-beech (Fagus orientalis) wood was carried out by hot air in an oven for 2, 4, and 8 h at 140, 170, and 200 degrees C. After heat treatment, some physical characteristics such as surface roughness, ... -
Some physical, wood polymer biological, mechanical, and fire properties of composite (WPC) pretreated with boric acid and borax mixture
(Elsevier Sci Ltd, 2007)Wood polymer composite (WPC) was obtained by vinyl monomers such as styrene (ST), methylmethacrylate (MMA), and their mixture (50:50; volume:volume) of treated sapwood of Scots pine (Pinus sylvestris L.). Boric acid (BA) ... -
SOME PROPERTIES OF TURKISH SWEETGUM BALSAM (STYRAX LIQUIDUS) IMPREGNATED ORIENTAL BEECH WOOD PART I: PHYSICAL PROPERTIES
(Slovak Forest Products Research Inst, 2015)The purpose of this study was to investigate some physical properties such as water absorption (WA), color, gloss, and surface hardness changes of Oriental beech (Fagus orientalis L.) wood impregnated with Turlcish sweetgum ... -
SOME SURFACE CHARACTERISTICS OF ORIENTAL BEECH WOOD IMPREGNATED WITH SOME FIRE-RETARDANTS AND COATED WITH POLYUREA/POLYURETHANE HYBRID AND EPOXY RESINS
(Universidad del Bio-Bio, 2021)This study was made to determine surface characteristics such as colour, gloss, and surface hardness changes of Oriental beech (Fagus orientalis). The wood specimens were firstly impregnated with some fireretardants(FRs) ... -
SOME SURFACE CHARACTERISTICS OF VARNISHED THERMOWOOD AFTER WEATHERING
(Slovak Forest Products Research Inst, 2019)This study was designed to investigate some surface characteristics such as glossiness and surface roughness changes of varnished thermowood after six months of weathering. Thermal modification of Scots pine (Pinus sylvestris ...