Başlık için Ağaç İşleri Endüstri Mühendisliği Bölümü Koleksiyonu listeleme
Toplam kayıt 109, listelenen: 50-69
-
IImpact of uv irradiance on selected parameters of scots pine impregnated with some commonly used fire- retardants
(Slovak Forest Products Research Inst, 2019)This study was designed to determine some selected parameters such as gloss, surface roughness, and color changes of Scots pine wood impregnated with commonly used fire-retardant (FR) chemicals after UV irradiance. Sodium ... -
Improvement of technological properties of wood plastic composites reinforced with glass and carbon fibre fabric
(SAGE Publications Ltd, 2021)In this study, HDPE-based flat-pressed WPCs were reinforced with glass fibre and carbon fibre woven fabrics, which could be used where high strength and stiffness are required. The effect of reinforcement on some physical, ... -
IMPROVING MECHANICAL AND PHYSICAL PROPERTIES OF PARTICLEBOARD MADE FROM VINE (VITIS VINIFERA L.) PRUNINGS BY ADDITION REINFORCEMENT MATERIALS
(Slovak Forest Products Research Inst, 2016)The main goal of this study was to improve mechanical and physical properties of particleboards made from vine (Vitis vinjfera L.) prunings by addition of reinforcement materials. In Turkey, there are 462.000 hectare areas ... -
Improving Weathering Performance of Wood by Borates Impregnation and Liquid Glass Coating
(Zagreb Univ, Fac Forestry, 2020)Weathering performance of impregnated and coated wood products is an important issue that influences their appearance as well as their service life after outdoor or indoor exposure. A novel procedure to improve the weathering ... -
Increasing the physical and combustion performance of Oriental beech by impregnating borates and coating liquid glass
(ASSOC BRASIL POLIMEROS, 2021)This study was designed to investigate physical properties such as color changes after weathering and water absorption (WA) levels, and combustion performance of borates-impregnated and LG-coated Oriental beech wood. Results ... -
An investigation of some physical and mechanical properties of laminated veneer lumber manufactured from black alder (Alnus glutinosa) glued with polyvinyl acetate and polyurethane adhesives
(Forest Products Soc, 2006)This study was designed to determine some physical and mechanical properties of laminated veneer lumber (LVL) made of black alder (Alnus glutinosa). Veneers were prepared from 2-mm and 4-mm-thick black alder and glued using ... -
Investigation of some physical and mechanical properties of wood coated with plant-oil based epoxide nanocomposite materials
(Elsevier B.V., 2023)Some mechanical and physical properties of wood from the Oriental beech (Fagus orientalis L.) coated with bio-based epoxide amine nanocoatings were investigated in this study. Firstly, plant oil-based epoxide (ETO) was ... -
LOWER TOLERANCE LIMIT APPROACH TO EQUATION-BASED RATIONAL DESIGN VALUES FOR L-SHAPED MORTISE AND TENON JOINTS
(Soc Wood Sci Technol, 2017)Statistical lower tolerance limits (LTLs) were computed for the ratios obtained by dividing the test values for 360 L-shaped rectangular mortise and tenon joints consisting of 72 different configurations of five specimens ... -
Masif ve Lamine ağaç malzemelerin (LAM) Alyan Vida tutma mukavemeti
(2009)Bu çalışmada, farklı ağaç türlerinden hazırlanan, polivinilasetat (PVAc) ve üre-formaldehit (ÜF) tutkallarıyla yapıştırılmış lamine malzemelerin (LVL), liflere dik ve paralel doğrultudaki alyan vida tutma performansları, ... -
MECHANICAL AND FIRE PROPERTIES OF ORIENTAL BEECH IMPREGNATED WITH FIRE-RETARDANTS AND COATED WITH POLYUREA/POLYURETHANE HYBRID AND EPOXY RESINS
(UNIV BIO-BIO, 2022)This study was performed to investigate some mechanical properties such as modulus of rupture and compression strength parallel to grain and some fire properties such as weight loss and temperature values of Oriental beech ... -
Mechanical and thermal properties of polyvinyl acetate foams reinforced with biopolymers
(SAGE Publications Ltd, 2023)The study developed and designed polyvinyl acetate (PVAc) foams using advanced freeze-drying technology, which exhibited good heat-insulating ability, flame retardancy, and mechanical properties. Different combinations of ... -
Mechanical Properties of Externally Invisible Furniture Joints Made of Wood-Based Composites
(North Carolina State Univ Dept Wood & Paper Sci, 2016)The aim of this investigation was to design and determine the mechanical properties of innovative, externally invisible, 3D-printed cabinet furniture joints that can be assembled without the use of tools. The cognitive ... -
Meyan Kökü (Glycyrrhiza glabra) Ekstraktı ve Sıvıcam Karışımı ile Boyanan Bazı Odun Türlerinin Yanma Özellikleri
(2018)Bu çalışmanın amacı; Meyan kökü (Glycyrrhiza glabra) bitkisinden elde edilen ekstraktlar ve sıvıcam karışımı ile ağaç malzemenin boyanması ve yangın geciktiricilik özelliklerinin belirlenmesidir. Bu kapsamda; deneylerde ... -
Moment capacity of traditional and alternative T-type end-to-side-grain furniture joints
(Forest Products Soc, 2005)The bending moment capacity of traditional and alternative T-type end-to-side-grain joints constructed of Oriental beech (Fagus orientalis Lipsky), European oak (Quercus borealis Lipsky), and Scotch pine (Pinus sylvestris ... -
Moment resistance of multiscrew L-type corner joints
(Forest Products Soc, 2005)This study investigated the effects of screw diameter and length, loading, board material, board surface condition, and gluing, on moment resistances of three-screw L-type corner joints. Wood-based composite panels utilized ... -
Montaja hazır koltuk iskeletlerinin mukavemetinin sonlu elemanlar analizi ile belirlenmesi
(2007)Bu çalışmada, ağaç ve ağaç esaslı (kompozit) malzemelerden tutkalsız-vidalı (demonte) olarak üretilmiş koltuk iskeletlerinin mukavemet özellikleri araştırılmıştır. Ayrıca, koltuk yan düzlem çerçevesinde, ara kayıtın yeri ... -
Natural Fiber Blend-Nylon 6 Composites
(Wiley-Blackwell, 2013)In this study, engineering thermoplastic composites were prepared from natural fiber blendfilled nylon 6. Natural fiber blend from a mixture of kenaf, flax, and hemp fibers were added to nylon 6 using melt mixing to produce ... -
A new boron impregnation technique of wood by vapor boron of boric acid to reduce leaching boron from wood
(Springer, 2005)This study was designed to reveal impregnation ability and to enhance leaching resistance of boron from borate-treated wood. Vapor boron treatment was applied in cornpressed and uncompressed states at high temperatures ... -
Numerical Analyses of Various Sizes of Mortise and Tenon Furniture Joints
(North Carolina State Univ Dept Wood & Paper Sci, 2016)This study reports the moment resistance, stiffness, and numerical analysis of various sizes of round-end mortise and tenon joints. L-shaped and T-shaped specimens were constructed. Joints were manufactured using three ... -
Optimization of the Cross-Sectional Geometry of Auxetic Dowels for Furniture Joints
(PMC, 2023)In this study, the aim was to optimize the cross-sectional geometry of auxetic dowels for furniture joints. For this purpose, two different sizes of auxetic dowels were chosen, one for frame- and the other for panel-type ...