Yayıncı "Soc Wood Sci Technol" Scopus İndeksli Yayınlar Koleksiyonu için listeleme
Toplam kayıt 7, listelenen: 1-7
-
EFFECT OF ADHESIVE TYPE AND TENON SIZE ON BENDING MOMENT CAPACITY AND RIGIDITY OF T-SHAPED FURNITURE JOINTS CONSTRUCTED OF TURKISH BEECH AND SCOTS PINE
(Soc Wood Sci Technol, 2013)Tests were carried out to determine the effect of wood species, adhesive type, and tenon width and length on static bending moment capacity and rigidity of T-shaped mortise and tenon furniture joints. For this purpose, 320 ... -
EFFECT OF MATERIAL PROPERTIES AND ANCHORAGE LOCATION ON LOAD-BEARING CAPACITY OF SCREW-CONNECTED AND HUNG CABINETS
(Soc Wood Sci Technol, 2014)Effects of material type and thickness of selected wood-based composites for construction of cabinets and anchorage location of screws attaching cabinets to the wall on the vertical load-bearing capacity of four-sided wall ... -
EFFECT OF TENON GEOMETRY, GRAIN ORIENTATION, AND SHOULDER ON BENDING MOMENT CAPACITY AND MOMENT ROTATION CHARACTERISTICS OF MORTISE AND TENON JOINTS
(Soc Wood Sci Technol, 2012)Bending moment capacity and moment rotation characteristics of mortise and tenon joints as a function of tenon geometry, grain orientation, length, and shoulder fit were examined. Bending moment capacity of all joints in ... -
LOWER TOLERANCE LIMIT APPROACH TO EQUATION-BASED RATIONAL DESIGN VALUES FOR L-SHAPED MORTISE AND TENON JOINTS
(Soc Wood Sci Technol, 2017)Statistical lower tolerance limits (LTLs) were computed for the ratios obtained by dividing the test values for 360 L-shaped rectangular mortise and tenon joints consisting of 72 different configurations of five specimens ... -
RELATIONSHIP BETWEEN STATIC AND CYCLIC FRONT TO BACK LOAD CAPACITY OF WOODEN CHAIRS, AND EVALUATION OF THE STRENGTH VALUES ACCORDING TO ACCEPTABLE DESIGN VALUES
(Soc Wood Sci Technol, 2018)Tests were carried out to investigate the relationship between static and cyclic strength of wooden chairs. Furthermore, cyclic front to back load performance of chairs were compared with acceptable design loads that were ... -
TECHNICAL NOTE: LOWER TOLERANCE LIMIT APPROACH TO EQUATION-BASED RATIONAL DESIGN VALUES FOR T-SHAPED MORTISE AND TENON JOINTS
(Soc Wood Sci Technol, 2017)A nonlinear regression expression was fitted to the test data obtained from a study of the bending moment capacity of 320 rectangular T-shaped mortise and tenon furniture joints consisting of 64 configurations of five ... -
TECHNICAL NOTE: STATIC VERSUS CYCLIC LOAD CAPACITY OF SIDE CHAIRS CONSTRUCTED WITH MORTISE AND TENON JOINTS
(Soc Wood Sci Technol, 2013)The effect of cross-sectional tenon geometry on static and cyclic load capacity of side chairs constructed with round-, rectangular-, and diamond-shaped mortise and tenon joints was investigated. Cyclic load capacity ...